Water heater HELP!!! |
Post Reply | Page <12 |
Author | |
Jamie&Nicole
Newbie Joined: 15 Mar 2015 Online Status: Offline Posts: 17 |
Topic: Water heater HELP!!! Posted: 23 May 2015 at 11:39pm |
Yes we purged the lines when initially setting up. However it ha worked to re-purge them, any ideas? Maybe just have dealer look?
|
|
techntrek
Admin Group - pHp Joined: 29 Jul 2009 Location: MD Online Status: Offline Posts: 9059 |
Posted: 23 May 2015 at 11:29pm |
If you purged the lines when you turned on the propane you shouldn't have to do it again during the same trip.
|
|
Doug ~ '10 171 (2009-2015) ~ 2008 Salem ~ Pod instruction manual
|
|
Jamie&Nicole
Newbie Joined: 15 Mar 2015 Online Status: Offline Posts: 17 |
Posted: 23 May 2015 at 10:30am |
Thanks Guys! We did light bunner intaily when setting up camp and turning in the propane, we we not aware that we would need to do so again even after the intail time when turning on propane. Easy fix tho!!! Thank you all hope everyone is having a great Memorial Day weekend!
|
|
furpod
Moderator Group - pHp Joined: 25 Jul 2011 Location: Central KY Online Status: Offline Posts: 6128 |
Posted: 23 May 2015 at 9:29am |
There is no pilot light. DSI stands for Direct Spark Ignition. It lights when it needs to light, shuts off when done. If it tries 3 times, and doesn't light, it "faults" and you get the light on on the panel. Shut off and let it try again. It may take several tries for the gas to get back there. Lighting a burner for a few seconds will purge the line, and you won't have to go through this.
|
|
Podster
Senior Member Joined: 16 Sep 2014 Location: San Antonio Online Status: Offline Posts: 1108 |
Posted: 23 May 2015 at 12:33am |
Probably just air in the lines. Make sure the valve on the propane tank is all the way open and purge the air in the lines by lighting each burner for 15 seconds. Then try it again.
Edit: There is also two reset buttons on the outside, you can try those if this doesn't work.
|
|
Cliff & Raelynn
Ranger 4.0/178 (1/2 ton 5,800lb tow capacity) |
|
Jamie&Nicole
Newbie Joined: 15 Mar 2015 Online Status: Offline Posts: 17 |
Posted: 23 May 2015 at 12:03am |
3rd time out in our new pod! No issues the 1st two times but this time we notice the water heater pilot light keeps going off. The DSL fault light comes on and the pilot tries to light itself numerous times but is not usually successful when we switch off and on the water heater it will usually relight after a couple tries. Just wondering if any may know what is going on or had similar issue? Thanks for all your help in advance!
|
|
Post Reply | Page <12 |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |