Author |
Share Topic Topic Search Topic Options
|
David and Danette
podders Helping podders - pHp
Joined: 24 Nov 2009
Online Status: Offline
Posts: 1223
|
Topic: Air Conditioner Posted: 28 Jul 2013 at 1:53pm |
I have crawled on my roof several times to spread out the weight when washing and repairing AC. I weigh a 165 Lbs. I have had no problem, you do need be very careful near the front or back that you do not slide off. With the 171's you have some support from the wet bath under the roof. I have always climbed on the roof from the right side the side of the bath. I would not walk on the roof that would be to much weight in a small area. This is my own experience not recommending it for everyone you do need to use caution and your own judgement. I am lite weight someone much heavier I would recommend not to get on the roof. David
|
2018 Vista Cruiser 19BFD (2018-
2012 Vibe 6503 (2014-2019)
2009 r-pod 171 (2009-2014)
Middle Tn
2014 Ram 1500 Quad cab
|
 |
furpod
Moderator Group - pHp
Joined: 25 Jul 2011
Location: Central KY
Online Status: Offline
Posts: 6128
|
Posted: 28 Jul 2013 at 1:58pm |
Originally posted by Outbound
When I replaced the start capacitor on my A/C, I just used a tall step ladder beside the r-pod and stood on the ladder/laid my weight on the roof's edge so that the vertical studs in the wall were bearing most my weight. It was a close enough reach to unscrew the shroud (had to move the ladder to the other side to get the other screws), zip-tie in the new capacitor and move the connectors. I left the old start capacitor in-place because there was plenty of room for both and I figured why not leave a spare?
Frankly, on that roof, I wouldn't want to put any more than 30 or 40 pounds on a point load the area of a shoe. |
Almost exactly how I did it.. I did remove the old cap. I don't think the roof structure is to much different from the floor structure..
|
 |
techntrek
Admin Group - pHp
Joined: 29 Jul 2009
Location: MD
Online Status: Offline
Posts: 9062
|
Posted: 28 Jul 2013 at 9:13pm |
Ditto when I cleaned mine - only the weight of my torso and that was laid mostly on the edge or flat across the roof when I was reaching to the middle. There is no way it will support someone walking on it, the floor has the metal frame but the roof is just some thin wood slats, insulation and fiberglass.
|
|
 |
dsmiths
Senior Member
Joined: 10 Oct 2011
Location: Southern Ind
Online Status: Offline
Posts: 866
|
Posted: 29 Jul 2013 at 8:29pm |
Kymooses, watch out you guys are close enough to me I might be able to hear you screaming on the way down. LOL
|
Dane and Donna Smith
2011 RP-172
2008 Chevrolet Trailblazer 4X4
lift kit
prodigy wireless brake controller
|
 |
kymooses
Senior Member
Joined: 01 Aug 2010
Location: Louisville, Ky
Online Status: Offline
Posts: 1807
|
Posted: 30 Jul 2013 at 9:28am |
Originally posted by dsmiths
Kymooses, watch out you guys are close enough to me I might be able to hear you screaming on the way down. LOL  |
I sounded very alike a frightened little girl I'm sure and it was certainly loud. Just not loud enough that my wife paid me any attention.
New Pod rule is, when I'm washing the room and AC no MP3 players or mowing. That is now designated as pull weeds time so she can hear me!  
|
|
 |
David and Danette
podders Helping podders - pHp
Joined: 24 Nov 2009
Online Status: Offline
Posts: 1223
|
Posted: 31 Jul 2013 at 4:50am |
I w as on the Camping World Web site and noticed that Atwood is selling RV air conditioners manufactured I believe in Australia. The smallest they sell is 13.5 BTU a little to large for the r-pods.
|
2018 Vista Cruiser 19BFD (2018-
2012 Vibe 6503 (2014-2019)
2009 r-pod 171 (2009-2014)
Middle Tn
2014 Ram 1500 Quad cab
|
 |
TerryM
Admin Group - pHp
Joined: 16 Nov 2009
Location: Saint Augustine
Online Status: Offline
Posts: 1950
|
Posted: 31 Jul 2013 at 7:01am |
|
RP-175 W/Lift Kit 2011 Ford F-150 4X4
Saint Augustine, FL: The first permanent European settlement in the USA: 1565
|
 |
Sleepless
Senior Member
Joined: 07 Jun 2013
Location: Titusville, FL
Online Status: Offline
Posts: 556
|
Posted: 31 Jul 2013 at 8:30am |
Those are both neat installation possibilities. Terry, I am not one for cutting openings in the pod exterior, but when I looked at the A/C unit you found, right away I thought of usiing a simple window A/C instead. It would take but one opening and would be very inexpensive and not as susceptible to damage when towing.
Bob
|
2014 R-Pod 178 (OUR POD)
2009 Chevrolet Avalanche
|
 |
TerryM
Admin Group - pHp
Joined: 16 Nov 2009
Location: Saint Augustine
Online Status: Offline
Posts: 1950
|
Posted: 31 Jul 2013 at 2:55pm |
I would put it inside during travel times. The first one is a better choice.
Terry
|
RP-175 W/Lift Kit 2011 Ford F-150 4X4
Saint Augustine, FL: The first permanent European settlement in the USA: 1565
|
 |
techntrek
Admin Group - pHp
Joined: 29 Jul 2009
Location: MD
Online Status: Offline
Posts: 9062
|
Posted: 31 Jul 2013 at 8:05pm |
My long investigation into alternatives. http://www.rpod-owners.com/forum_posts.asp?TID=1433&KW=polar&PN=1&title=possible-replacement-for-the-a-c I still would love the first one I mention, very very low power with possibilities for battery operation (via inverter). But it has a complicated installation and is very expensive. The Polar Cub makes the most sense overall.
|
|
 |