![]() |
Important - check this every time you set up |
Post Reply ![]() |
Page <1 202122 |
Author | |
mcarter ![]() podders Helping podders - pHp ![]() ![]() Joined: 07 Apr 2016 Location: Greenbrier, TN Online Status: Offline Posts: 3419 |
![]() ![]() ![]() ![]() Posted: 28 Jun 2020 at 6:15pm |
+1
|
|
Mike Carter
2015 178 " I had the right to remain silent, I just didn't have the ability." |
|
![]() |
|
Pod People ![]() Senior Member ![]() Joined: 22 Sep 2011 Location: Chapel Hill,NC Online Status: Offline Posts: 1088 |
![]() ![]() ![]() ![]() |
I made a simple 30 amp electrical tester that will show the line voltage as well as check polarity and ground. I used a male 30 amp plug, a standard 120 volt receptacle tester and a digital voltmeter with a standard plastic electrical box and a standard 120v receptacle. I will use this to test any power source that I plug the R Pod into. Vann
|
|
![]() |
|
podwerkz ![]() Senior Member ![]() ![]() Joined: 11 Mar 2019 Location: Texas Online Status: Offline Posts: 966 |
![]() ![]() ![]() ![]() |
By golly that DIY unit will work, I just use a Camco tester and surge protector. I generally unplug during a storm. Yes I realize stuff can happen, but that has been my strategy for years with a lot of different campers. So far, so good.
|
|
r・pod 171 gone but not forgotten!
|
|
![]() |
|
Pod_Geek ![]() Senior Member ![]() Joined: 04 Dec 2019 Location: Colorado Online Status: Offline Posts: 261 |
![]() ![]() ![]() ![]() |
Second pedestal fault in 6 months detected by Hughes Autoformer
In February the Autoformer indicated a ground fault so I moved sites.
Pulled in to a KOA last Saturday and plugged the Autoformer into the 30-amp socket to check the pedestal before connecting the R-Pod (as always) and it showed an open neutral. 20-amp also showed an open neutral. Walked over to the office and office guy radioed maintenance immediately and by the time I had walked back he had already hooked up a 50-to-30 dogbone to the Autoformer ![]() No faults showed up so I just went with it (campground was full of course). Worked fine...no conflagrations resulted ![]() I asked maintenance guy if this was a known issue with this pedestal and he said yes ![]() He then taped over the 20- and 30-amp sockets with a message that they weren't working and to borrow a 50-to-30 dogbone from the office if needed. Just another cautionary tale from the world of RV electric...
|
|
2020.5 R-Pod 195 Hood River
2018 RAM 2500 6.4L |
|
![]() |
|
offgrid ![]() Senior Member ![]() Joined: 23 Jul 2018 Online Status: Offline Posts: 5290 |
![]() ![]() ![]() ![]() |
I guess if they can’t get away with electrocuting you with an open neutral they’ll happily burn you up by injecting 50A into your 30A circuit. Where is this KOA so I can be sure I never ever stay there?
|
|
1994 Chinook Concourse
1995 RV6A Experimental Aircraft 2015 Rpod 179 - sold |
|
![]() |
|
Pod_Geek ![]() Senior Member ![]() Joined: 04 Dec 2019 Location: Colorado Online Status: Offline Posts: 261 |
![]() ![]() ![]() ![]() |
Here's a clue. Let's see if anyone figures it out before I tell you. |
|
2020.5 R-Pod 195 Hood River
2018 RAM 2500 6.4L |
|
![]() |
|
offgrid ![]() Senior Member ![]() Joined: 23 Jul 2018 Online Status: Offline Posts: 5290 |
![]() ![]() ![]() ![]() |
It must be the goats' fault, they like to chew on wire insulation. We used goats to keep down the grass on a solar farm and found that out. Sheep work better.
![]() |
|
1994 Chinook Concourse
1995 RV6A Experimental Aircraft 2015 Rpod 179 - sold |
|
![]() |
|
Luna2020 ![]() Newbie ![]() Joined: 09 Apr 2021 Online Status: Offline Posts: 1 |
![]() ![]() ![]() ![]() |
OMG...thank you so much for sharing and happy to hear no one was seriously injured. New to TT and had no idea this was an issue. Ordered my tester to have w/ me on all my future trips
|
|
![]() |
Post Reply ![]() |
Page <1 202122 |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |