Author |
Share Topic Topic Search Topic Options
|
mountain mist
Senior Member
Joined: 25 May 2010
Location: Gatlinburg Tenn
Online Status: Offline
Posts: 426
|
Topic: Leveling for operation of refrigator Posted: 11 Jul 2010 at 7:00pm |
I have heard rumor that these days leveling is not as critical for running the refrigerator.
I mean reasonably level, not just perfect. I would like to hear some opinions on this. Thank you
|
'11 Forest River r.pod 171
'10 Ford Edge
ESCAPE POD
Trudi and Austin mini-schnauzers
change here, Trudi has gone, Austin now has a small black schnauzer buddy, Bentley
|
 |
rpodcamper.com
Admin Group - pHp
Joined: 26 Nov 2009
Location: Reading, Pa
Online Status: Offline
Posts: 3990
|
Posted: 11 Jul 2010 at 11:01pm |
you do want some form of level to run the Fridge. Does not need to be 100%
|
 |
techntrek
Admin Group - pHp
Joined: 29 Jul 2009
Location: MD
Online Status: Offline
Posts: 9062
|
Posted: 11 Jul 2010 at 11:21pm |
I have heard that modern fridges are more tolerant than ones in years past. But, thinking critically, I don't see how this is possible. The problem is that crystals will build up in the tubes you see inside the fridge compartment (looking from the outside of the 'pod). Once enough have built up the ammonia won't flow and the fridge is dead for good. I don't see how they could make the inside of the tubes any differently or make the ammonia flow any better when on an incline. Fundamentally the technology hasn't changed since it was discovered many moons ago. So that is my dilemma. Maybe I'm wrong and they have made them better. I still shoot for as level as I can get - between laying in bed at night, the fridge, shower and sink. Remember that level isn't an issue when you are going down the road, the bouncing keeps things flowing.
|
|
 |
blissful
Groupie
Joined: 17 Apr 2011
Location: Florida
Online Status: Offline
Posts: 53
|
Posted: 20 Apr 2011 at 5:18pm |
I found some small stick-on levelers at Wal-mart and put one on the outside of fridge so I can make certain it's level.
|
 |
Outbound
podders Helping podders - pHp
Joined: 19 Nov 2009
Location: Oshawa, Ontario
Online Status: Offline
Posts: 767
|
Posted: 20 Apr 2011 at 10:16pm |
+1 for techntrek
Besides, I sleep very poorly if the trailer isn't level. Personally, I use a Hoppy Hitch Level and lynx levelers - it only takes a minute to level out the trailer.
|
Craig :: 2009 RP171 towed by a 2017 F150
|
 |
TIDALWAVE
Senior Member
Joined: 21 Nov 2009
Location: MINNESOTA
Online Status: Offline
Posts: 315
|
Posted: 21 Apr 2011 at 11:35am |
I found that my BAL tire leveler was a best buy for leveling. I use the A-frame front trailer jack and the BAL leveler to do a quick adjustment. I also bought four very cheap stick-on RV bubble levels and put one on each side of my POD. In just a minute or two I have the POD level. I also bought a set of red plastic leveling pads to extend the reach of the jacks when I have to set up on a really uneven campsite. I found that yellow plastic pads start to crumble after just one season of camping!
|
TIDALWAVE
|
 |
Bigbit
Groupie
Joined: 27 Feb 2010
Location: USA
Online Status: Offline
Posts: 58
|
Posted: 21 Apr 2011 at 12:29pm |
The Dometic manual for my old R-Pod did not have leveling guidelines, but my Trailmanor's Norcold refrigerator manual states that the refrigerator should be level to within 3 degrees side-to-side, and within 6 degrees front to back. These level references are in relation to the refrigerator, not the trailer.
|
 |