Creating more space in the R-178 - R-pod Owners Forum

Fine looking work!

I like the cargo net idea because it matches everything else but wasn't able to locate that particular one so I was leaning towards making cabinet doors. My wife didn't want to be banging into the doors so had to find on a compromise. When I was younger I wanted to make a roll top desk but never got around to it so I opted for the tambour door. Easier than I thought it would be and now it's out of my system.

Jim & Clare
2016 R-pod 178
2014 Ford Edge

Actually I couldn't find anything online that would fit this opening so instead I built it from scratch. Not as difficult as I feared it would be. Plenty of DIY articles and YouTube videos online. First I drew the inside view of the cabinet full sized on some cardboard and laid out a shape for the track. Used that drawing to make a template to route a 5/16" groove for the door to slide in. I made the track in 2 pieces so I could get the door into the tight space.

I rounded the edges on some 3/4" poplar and cut each of the slats 1/4" thick. Then I set them in the track to check for length and figure out how many I needed to make.

Then I stained and finished them and glued them on to some cotton canvas from Walmart with a spray contact adhesive. I stretched the canvas and stapled it to some plywood. Then I screwed 2 straight boards to the plywood on the canvas at 90 degrees to use as guides to keep the slats lined up and straight. Then I used a sharp knife to cut away the excess canvas.

Jim & Clare
2016 R-pod 178
2014 Ford Edge

yes indeed, very nice work. Thanks for the info.

2021 Winnebago Micro Minnie 1708FB
2017 R-Pod 177 (Blue) HRE SOLD
2004 Outfitter Apex 8 camper
2014 Toyota Tundra DC

Author	Message Share Topic Printable Version Google Delicious Digg StumbleUpon Windows Live Yahoo Bookmarks reddit Facebook MySpace Newsvine Furl Topic Search Topic Options Post Reply Create New Topic
greenpod Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 04 May 2017 Online Status: Offline Posts: 7	Topic: Creating more space in the R-178 Posted: 09 Jun 2017 at 5:10pm
	Fine looking work!

geewizard Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 16 Apr 2017 Location: Spokane Online Status: Offline Posts: 347	Posted: 10 Jun 2017 at 9:49am
	I removed the microwave from our 177 to use the space for added storage. In our 177, the inside of the space was finished so I didn't have to do anything other than put up a net. The net I bought from Amazon http://www.amazon.com/gp/product/B00QMT3488/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 fit perfectly.
	2021 Winnebago Micro Minnie 1708FB 2017 R-Pod 177 (Blue) HRE SOLD 2004 Outfitter Apex 8 camper 2014 Toyota Tundra DC

jimandclare Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 13 Apr 2016 Location: Erie, MI Online Status: Offline Posts: 96	Posted: 10 Jun 2017 at 4:11pm
	I like the cargo net idea because it matches everything else but wasn't able to locate that particular one so I was leaning towards making cabinet doors. My wife didn't want to be banging into the doors so had to find on a compromise. When I was younger I wanted to make a roll top desk but never got around to it so I opted for the tambour door. Easier than I thought it would be and now it's out of my system.
	Jim & Clare 2016 R-pod 178 2014 Ford Edge

geewizard Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 16 Apr 2017 Location: Spokane Online Status: Offline Posts: 347	Posted: 10 Jun 2017 at 7:17pm
	My wife likes your tambour door. Where did you get it?
	2021 Winnebago Micro Minnie 1708FB 2017 R-Pod 177 (Blue) HRE SOLD 2004 Outfitter Apex 8 camper 2014 Toyota Tundra DC

jimandclare Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 13 Apr 2016 Location: Erie, MI Online Status: Offline Posts: 96	Posted: 10 Jun 2017 at 8:27pm
	Actually I couldn't find anything online that would fit this opening so instead I built it from scratch. Not as difficult as I feared it would be. Plenty of DIY articles and YouTube videos online. First I drew the inside view of the cabinet full sized on some cardboard and laid out a shape for the track. Used that drawing to make a template to route a 5/16" groove for the door to slide in. I made the track in 2 pieces so I could get the door into the tight space. I rounded the edges on some 3/4" poplar and cut each of the slats 1/4" thick. Then I set them in the track to check for length and figure out how many I needed to make. Then I stained and finished them and glued them on to some cotton canvas from Walmart with a spray contact adhesive. I stretched the canvas and stapled it to some plywood. Then I screwed 2 straight boards to the plywood on the canvas at 90 degrees to use as guides to keep the slats lined up and straight. Then I used a sharp knife to cut away the excess canvas.
	Jim & Clare 2016 R-pod 178 2014 Ford Edge

Leo B Members Profile Send Private Message Find Members Posts Add to Buddy List podders Helping podders - pHp Joined: 13 Jan 2012 Location: Lyndonville, VT Online Status: Offline Posts: 4508	Posted: 11 Jun 2017 at 4:46am
	Nice work!!
	Leo & Melissa Bachand 2017 Ford F150 2021 Vista Cruiser 19 csk Previously owned 2015 Rpod 179 2010 Rpod 171

geewizard Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 16 Apr 2017 Location: Spokane Online Status: Offline Posts: 347	Posted: 11 Jun 2017 at 8:30am
	yes indeed, very nice work. Thanks for the info.
	2021 Winnebago Micro Minnie 1708FB 2017 R-Pod 177 (Blue) HRE SOLD 2004 Outfitter Apex 8 camper 2014 Toyota Tundra DC