R-pod Owners Forum Homepage

This site is free to use.
Donations benefit a non-profit Girls Softball organization

Forum Home Forum Home > R-pod Discussion Forums > Podmods, Maintenance, Tips and Tricks
  New Posts New Posts RSS Feed: Water Heater Question
  FAQ FAQ  Forum Search   Calendar   Register Register  Login Login

Topic ClosedWater Heater Question
 Post Reply Post Reply
Author
Message
  Share Topic Share Topic  Topic Search Topic Search  Topic Options Topic Options
HawksPodder View Drop Down
Newbie
Newbie


Joined: 30 Apr 2016
Location: WA
Online Status: Offline
Posts: 5 		Direct Link To This Post Topic: Water Heater Question
    Posted: 09 May 2016 at 12:48pm
I took my first trip in my 179 over the weekend and now have issues with my water heater and looking for advice.

It was a dry camping weekend and when we got there on Friday we tested out everything and everything worked even the water heater.  We used hot water to wash the dishes.  What we did notice is that the water did not get as hot as our previous trailer.

Then on Saturday I could hear the water heater turning on but the hot water was lukewarm.  We wound up heating up water on the stove to do dishes.

Then on Sunday the water heater stopped working.  When I turn it on all I hear is humming sound and the DSI Fault next to the switch is red.

I've made sure that it was on gas not electric, made sure that water heater was full of water.
Any things that I can check before taking it to the dealer.

Thanks,
Rodney
Back to Top
Leo B View Drop Down
podders Helping podders - pHp
podders Helping podders - pHp
Avatar

Joined: 13 Jan 2012
Location: Lyndonville, VT
Online Status: Offline
Posts: 4508 		Direct Link To This Post Posted: 09 May 2016 at 1:51pm
Check your winterizing valves, sounds like your by-pass handle might not be turn all the way.
Leo & Melissa Bachand
2017 Ford F150
2021 Vista Cruiser 19 csk
Previously owned
2015 Rpod 179
2010 Rpod 171
Back to Top
CharlieM View Drop Down
Senior Member
Senior Member
Avatar

Joined: 23 Nov 2012
Location: N. Colorado
Online Status: Offline
Posts: 1797 		Direct Link To This Post Posted: 09 May 2016 at 1:59pm
Might be two problems. As Leo B says, the most common cause of warm water is improper setting of the bypass valves. The center cross coupling valve should be closed; the other two should be open.

The failure to ignite may be an air bubble in  the propane line or lack of propane. That can be cleared by running the stove for a few minutes. Once the red error light comes on it must be manually reset by turning the WH off. It will not reset automatically.
Charlie
Northern Colorado
OLD: 2013 RP-172, 2010 Honda Pilot 3.5L 4WD
PRESENT: 2014 Camplite 21RBS, 2013 Supercharged Tacoma 4L V6 4WD
Back to Top
techntrek View Drop Down
Admin Group - pHp
Admin Group - pHp
Avatar

Joined: 29 Jul 2009
Location: MD
Online Status: Offline
Posts: 9059 		Direct Link To This Post Posted: 09 May 2016 at 2:39pm
Odd that you would hear a humming sound.  Usually you'll hear the DSI click-click-click, then nothing if it faults off.
Doug ~ '10 171 (2009-2015) ~ 2008 Salem ~ Pod instruction manual
Back to Top
HawksPodder View Drop Down
Newbie
Newbie


Joined: 30 Apr 2016
Location: WA
Online Status: Offline
Posts: 5 		Direct Link To This Post Posted: 09 May 2016 at 3:01pm
Thanks for all the input I'll take a look at the valves and see whats up.
Back to Top
TheBum View Drop Down
Senior Member
Senior Member


Joined: 26 Feb 2016
Location: Texas
Online Status: Offline
Posts: 1407 		Direct Link To This Post Posted: 09 May 2016 at 3:45pm
Originally posted by CharlieM

Once the red error light comes on it must be manually reset by turning the WH off. It will not reset automatically.


The DSI fault light comes on briefly when I first flip the switch during a trip and then goes out after a few seconds. Is there a certain amount of time a DSI fault must be detected before a reset is required?
Back to Top
techntrek View Drop Down
Admin Group - pHp
Admin Group - pHp
Avatar

Joined: 29 Jul 2009
Location: MD
Online Status: Offline
Posts: 9059 		Direct Link To This Post Posted: 09 May 2016 at 7:45pm
The short red light at first is normal, it stays red until the flame lights.  If the light comes on and stays on, then you need to reset on/off/on.
Doug ~ '10 171 (2009-2015) ~ 2008 Salem ~ Pod instruction manual
Back to Top
 Post Reply Post Reply

Forum Jump Forum Permissions View Drop Down

Bulletin Board Software by Web Wiz Forums® version 9.64
Copyright ©2001-2009 Web Wiz