R-pod Owners Forum Homepage

This site is free to use.
Donations benefit a non-profit Girls Softball organization

Forum Home Forum Home > R-pod Discussion Forums > Podmods, Maintenance, Tips and Tricks
  New Posts New Posts RSS Feed: Keder rail tips
  FAQ FAQ  Forum Search   Calendar   Register Register  Login Login

Topic ClosedKeder rail tips
 Post Reply Post Reply
Author
Message
  Share Topic Share Topic  Topic Search Topic Search  Topic Options Topic Options
GLBCamper View Drop Down
Senior Member
Senior Member
Avatar

Joined: 30 Jun 2015
Location: Oregon
Online Status: Offline
Posts: 274 		Direct Link To This Post Topic: Keder rail tips
    Posted: 12 Oct 2015 at 7:34pm
Please post any or all tips you have for overcoming those stinking screw heads that stick out on the keder rail and catch the rDome lip when you are pushing it through.

I tried using a dremmel with a very small grinding tip, but after two screws and little improvement, I thought there must be a better way.

Another podder at a campground said his sales guy told him to put dishwashing liquid on it. But he hadn't tried it and I wasn't sure if that meant to put it on the dome lip or rail, or if it would even work.

Any tips would be appreciated.
Old: 2014 177 HRE
2015 Tacoma V6 4x4 Double Cab
New: 2016 EVO ATS 200rd
2016 F150 4x4 Sport
Back to Top
podrunner View Drop Down
Senior Member
Senior Member
Avatar

Joined: 30 May 2013
Location: Draper, UT
Online Status: Offline
Posts: 106 		Direct Link To This Post Posted: 12 Oct 2015 at 7:47pm
I use a can of spray silicone.  Just spray it into the track.  Seems to work fine.
2010 R Pod 151
2017 4runner
2006 Honda Metropolitan
Back to Top
marwayne View Drop Down
Senior Member
Senior Member
Avatar

Joined: 25 Oct 2011
Location: Edmonton AB Can
Online Status: Offline
Posts: 1002 		Direct Link To This Post Posted: 12 Oct 2015 at 8:48pm
Angle the ends a little bit.

If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd.


Back to Top
techntrek View Drop Down
Admin Group - pHp
Admin Group - pHp
Avatar

Joined: 29 Jul 2009
Location: MD
Online Status: Offline
Posts: 9059 		Direct Link To This Post Posted: 12 Oct 2015 at 9:27pm
Keep filing off the screw heads.  Might go faster if you put a cutting disk on the Dremel instead of a grinding head.  Don't use soap, that will get messy.  Also bend open the ends of the channel slightly.
Doug ~ '10 171 (2009-2015) ~ 2008 Salem ~ Pod instruction manual
Back to Top
JohnBG View Drop Down
Senior Member
Senior Member


Joined: 14 Apr 2015
Location: Deltona, FL
Online Status: Offline
Posts: 190 		Direct Link To This Post Posted: 13 Oct 2015 at 4:13pm
Try silicone spray instead of grinding the heads.  If you ever have to pull the rail off for some reason, you're hosed.  

Angling the ends is a cool idea, I need to try that.
2010 R-Pod RP-171
2010 Honda Ridgeline TV
Back to Top
Grandpa Hiker View Drop Down
Senior Member
Senior Member
Avatar

Joined: 04 Jan 2015
Location: Martinsville, V
Online Status: Offline
Posts: 143 		Direct Link To This Post Posted: 13 Oct 2015 at 5:30pm
Initially I dreaded going through the process of getting the R-Dome setup. Even after spraying the keder rail with silicone, I stood on a step stool & pulled while my wife pushed from the  other end. Grinding down the heads of the screws did not help. 

 So next I removed all of the factory screws & carefully stored them in the circular file (trash can). I then used a drill bit with a tapered end & slightly drilled each screw hole in the rail. This made it so that the rail would accept a screw with a counter sunk head. I bought # 8 stainless steel counter sunk screws & installed them. Now the heads of the screws are flush with the surface of the rail. Also, as marwayne suggested, I used a utility knife to taper the end of dome lip.

I am now a very happy camper! Setting up the dome is easy & takes just a few minutes. I can easily push the dome lip all the way to the other end with no effort or assistance.
 
Rob & Becky
2014 Ford Explorer 3.5 SOHC V6
2015 R-179 Pod aka Piddle Pod

"Life is not about waiting for the storms to pass, it is about learning to dance in the rain!!"
Back to Top
David and Danette View Drop Down
podders Helping podders - pHp
podders Helping podders - pHp
Avatar

Joined: 24 Nov 2009
Online Status: Offline
Posts: 1215 		Direct Link To This Post Posted: 13 Oct 2015 at 7:03pm
   Our 2009 r-pod had the same problem as others did too. You would think Forest River would have made a correction after all these years. Their is obviously a problem.
2018 Vista Cruiser 19BFD (2018-              
2012 Vibe 6503 (2014-2019)
2009 r-pod 171 (2009-2014)
Middle Tn
2014 Ram 1500 Quad cab


Back to Top
 Post Reply Post Reply

Forum Jump Forum Permissions View Drop Down

Bulletin Board Software by Web Wiz Forums® version 9.64
Copyright ©2001-2009 Web Wiz