R-pod Owners Forum Homepage

This site is free to use.
Donations benefit a non-profit Girls Softball organization

Forum Home Forum Home > R-pod Discussion Forums > Introduce Yourself
  New Posts New Posts RSS Feed: New owner of used '09 152
  FAQ FAQ  Forum Search   Calendar   Register Register  Login Login

Topic ClosedNew owner of used '09 152

 Post Reply Post Reply Page  <1234>
Author
Message Reverse Sort Order
Seanl View Drop Down
Senior Member
Senior Member
Avatar

Joined: 19 Sep 2011
Location: Fredericton NB
Online Status: Offline
Posts: 633
Direct Link To This Post Topic: New owner of used '09 152
    Posted: 21 Jun 2013 at 3:10pm
Originally posted by Zag

Originally posted by g4royce

Zag, sorry for the late reply.  All 152s are covered under the recall. You will need your pod VIN # which is on the sticker just inside the screen door and/or on the silver sticker on the outside of your pod by the driver's side.  Contact Susan of FR and she should be able to send the parts to the nearest FR dealer of your choosing to do the install. The thread on the recall is here.

As for the rear window leak, it was a frame-design problem  on the first batch of rpods.  The original frame installed did not have proper weeping/drainage holes and the water would be forced into the frame and then drain into the interior of the pod.  Technically this is a design and manufacturing defect that was corrected in later models so FR should in theory give you an entire new replacement window for free. However the cost of installation is not included if you are not the original owner/pod is still under warranty etc.  The labour should be around $100-200 from a FR dealer.  Check to see if you have the new frame installed. it should not be curved or flush with the window but look a little awkward upon close inspection.  Basically a flat window installed in a very curved wall.... Tongue  It seems that the leak was much more severe on the 151s and the 152s because of the curve on the back wall. On the earliest 17x series it was also a problem but not that noticeable.



Thanks g4royce for the info. I started by contacting the local dealer and they also redirected me to Susan at FR. I emailed her my proof of ownership; just waiting to hear back.

I think I will follow up on my original email and look at having the back window addressed at the same time. I've heard mixed reviews regarding the local dealer so I'll have to see how it goes.

I bought my Rpod used from a non Rpod dealer and took it to a local Rpod dealer to have the lights put on. They did it no Questions asked. Now maybe that was because 1. The Rpod had been purchased originally at that dealer and 2. The Rpod was a Canadian Rpod. The Canadian Recall came about a year before the US one did. 
Sean, 2011 Rpod RP-173,2009 Jeep Liberty Rocky Mountain Edition
Back to Top
Zag View Drop Down
Groupie
Groupie
Avatar

Joined: 29 Apr 2013
Location: Canada
Online Status: Offline
Posts: 57
Direct Link To This Post Posted: 20 Jun 2013 at 5:37pm
Originally posted by g4royce

Zag, sorry for the late reply.  All 152s are covered under the recall. You will need your pod VIN # which is on the sticker just inside the screen door and/or on the silver sticker on the outside of your pod by the driver's side.  Contact Susan of FR and she should be able to send the parts to the nearest FR dealer of your choosing to do the install. The thread on the recall is here.

As for the rear window leak, it was a frame-design problem  on the first batch of rpods.  The original frame installed did not have proper weeping/drainage holes and the water would be forced into the frame and then drain into the interior of the pod.  Technically this is a design and manufacturing defect that was corrected in later models so FR should in theory give you an entire new replacement window for free. However the cost of installation is not included if you are not the original owner/pod is still under warranty etc.  The labour should be around $100-200 from a FR dealer.  Check to see if you have the new frame installed. it should not be curved or flush with the window but look a little awkward upon close inspection.  Basically a flat window installed in a very curved wall.... Tongue  It seems that the leak was much more severe on the 151s and the 152s because of the curve on the back wall. On the earliest 17x series it was also a problem but not that noticeable.



Thanks g4royce for the info. I started by contacting the local dealer and they also redirected me to Susan at FR. I emailed her my proof of ownership; just waiting to hear back.

I think I will follow up on my original email and look at having the back window addressed at the same time. I've heard mixed reviews regarding the local dealer so I'll have to see how it goes.
2009 RP-152 (Cutie-Pod)
2001 Nissan Pathfinder
Back to Top
Thinker View Drop Down
Senior Member
Senior Member
Avatar

Joined: 25 Feb 2013
Location: S. Mississippi
Online Status: Offline
Posts: 171
Direct Link To This Post Posted: 20 Jun 2013 at 12:00pm
In order to answer the question "can I tow with......"

Answer these questions:
How far do you want to tow?
How willing are you to climb hills in a low gear at 30 MPH?
How willing are you to destroy your transmission?

This is not the voice of doom, but are simply factors to consider. If you don't go too far and don't push the speed too hard on hills especially, you may not keep the vehicle long enough to see the effect of heat on the transmission.

You may be able to install a tranny cooler and even a transmission temp gauge to help you gauge when you need to stop for a rest stop or when it is no problem and can keep on going and forget about the heat.

As far as performance... chugging up hills in a head wind is what it is... how patient are you?
Tow Vehicle: 2013 Pathfinder 4WD R-POD Model 171
Back to Top
g4royce View Drop Down
Senior Member
Senior Member
Avatar

Joined: 20 Nov 2010
Location: PortStLucie FL
Online Status: Offline
Posts: 335
Direct Link To This Post Posted: 20 Jun 2013 at 10:08am
Zag, sorry for the late reply.  All 152s are covered under the recall. You will need your pod VIN # which is on the sticker just inside the screen door and/or on the silver sticker on the outside of your pod by the driver's side.  Contact Susan of FR and she should be able to send the parts to the nearest FR dealer of your choosing to do the install. The thread on the recall is here.

As for the rear window leak, it was a frame-design problem  on the first batch of rpods.  The original frame installed did not have proper weeping/drainage holes and the water would be forced into the frame and then drain into the interior of the pod.  Technically this is a design and manufacturing defect that was corrected in later models so FR should in theory give you an entire new replacement window for free. However the cost of installation is not included if you are not the original owner/pod is still under warranty etc.  The labour should be around $100-200 from a FR dealer.  Check to see if you have the new frame installed. it should not be curved or flush with the window but look a little awkward upon close inspection.  Basically a flat window installed in a very curved wall.... Tongue  It seems that the leak was much more severe on the 151s and the 152s because of the curve on the back wall. On the earliest 17x series it was also a problem but not that noticeable.


ChaiPod
2009 RP152
2011 Hyundai Santa Fe 3.5L V6
Back to Top
Zag View Drop Down
Groupie
Groupie
Avatar

Joined: 29 Apr 2013
Location: Canada
Online Status: Offline
Posts: 57
Direct Link To This Post Posted: 03 Jun 2013 at 10:30am
Originally posted by Seanl

 

Did you import the trailer to Canada? I ask because in order to import a vehicle into Canada you need a recall clearance letter.
[/QUOTE]

Seanl,
The original owner imported the trailer into Canada just prior to me buying it. Apparently I was the first person to mention the recall when I first looked at it. Somebody wasn't being thorough in their job I guess...


2009 RP-152 (Cutie-Pod)
2001 Nissan Pathfinder
Back to Top
Seanl View Drop Down
Senior Member
Senior Member
Avatar

Joined: 19 Sep 2011
Location: Fredericton NB
Online Status: Offline
Posts: 633
Direct Link To This Post Posted: 03 Jun 2013 at 6:40am
Originally posted by Zag

Hi G4Royce,
I had all the windows resealed when I bought the RV so I should be okay there?
The running lights haven't been put on yet (original owner wasn't aware of the recall). Once I get all my TV fixed up with a 7-pin connector I'll reach out to the local dealership to get the lights added. Hopefully I won't have any issues with the trailer being from the US orginally (and currently migrated to Canada).


Did you import the trailer to Canada? I ask because in order to import a vehicle into Canada you need a recall clearance letter.
Sean, 2011 Rpod RP-173,2009 Jeep Liberty Rocky Mountain Edition
Back to Top
Zag View Drop Down
Groupie
Groupie
Avatar

Joined: 29 Apr 2013
Location: Canada
Online Status: Offline
Posts: 57
Direct Link To This Post Posted: 02 Jun 2013 at 11:45pm
Hi G4Royce,

I had all the windows resealed when I bought the RV so I should be okay there?

The running lights haven't been put on yet (original owner wasn't aware of the recall). Once I get all my TV fixed up with a 7-pin connector I'll reach out to the local dealership to get the lights added. Hopefully I won't have any issues with the trailer being from the US orginally (and currently migrated to Canada).
2009 RP-152 (Cutie-Pod)
2001 Nissan Pathfinder
Back to Top
techntrek View Drop Down
Admin Group - pHp
Admin Group - pHp
Avatar

Joined: 29 Jul 2009
Location: MD
Online Status: Offline
Posts: 9059
Direct Link To This Post Posted: 30 May 2013 at 8:55pm
Congrats.  The flip side of what sailo is saying is with a 4-pin connector you only get left/right/brake/running lights.  Since you must also have brakes (not just brake lights), you'll have to convert to a 7-pin Bargeman and get a brake controller. 
Doug ~ '10 171 (2009-2015) ~ 2008 Salem ~ Pod instruction manual
Back to Top
sailo25 View Drop Down
Newbie
Newbie
Avatar

Joined: 21 Mar 2013
Location: Michigan
Online Status: Offline
Posts: 37
Direct Link To This Post Posted: 30 May 2013 at 11:30am
Also just bought a Honda pilot which I will hook up power and brakes.
Back to Top
sailo25 View Drop Down
Newbie
Newbie
Avatar

Joined: 21 Mar 2013
Location: Michigan
Online Status: Offline
Posts: 37
Direct Link To This Post Posted: 30 May 2013 at 11:28am
You can but you do not have brakes and 12v power to your trailer when towing the one I got has leads that can be run to the battery and brake controller if you install one. I have not but I am pulling short distances and have a 151
Back to Top
 Post Reply Post Reply Page  <1234>

Forum Jump Forum Permissions View Drop Down

Bulletin Board Software by Web Wiz Forums® version 9.64
Copyright ©2001-2009 Web Wiz