Floor Repair

Message Share Topic Printable Version Google Delicious Digg StumbleUpon Windows Live Yahoo Bookmarks reddit Facebook MySpace Newsvine Furl Topic Search Topic Options Post Reply Create New Topic

   I drilled through the floor on our 179 a couple years ago and I recall it being fairly thick. It was over an inch for sure; may even have been 1-1/2". I didn't need the exact thickness for what I was doing, but I recall it being thicker than I expected.
You may just want to drill a test hole through someplace inconspicuous to get what you need. You can fill the hole with caulk.

Author	Message Share Topic Printable Version Google Delicious Digg StumbleUpon Windows Live Yahoo Bookmarks reddit Facebook MySpace Newsvine Furl Topic Search Topic Options Post Reply Create New Topic
GlueGuy Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 15 May 2017 Location: N. California Online Status: Offline Posts: 2649	Post Options Post Reply Quote GlueGuy Report Post Quote Reply Topic: Floor Repair Posted: 29 Jan 2024 at 10:29am
	I drilled through the floor on our 179 a couple years ago and I recall it being fairly thick. It was over an inch for sure; may even have been 1-1/2". I didn't need the exact thickness for what I was doing, but I recall it being thicker than I expected. You may just want to drill a test hole through someplace inconspicuous to get what you need. You can fill the hole with caulk.
	bp 2017 R-Pod 179 Hood River 2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost

cbardy58 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 25 Sep 2021 Online Status: Offline Posts: 6	Post Options Post Reply Quote cbardy58 Report Post Quote Reply Posted: 29 Jan 2024 at 10:40am
	The "subfloor" is a multi-layered/compressed/glued concoction of thin plywood (1/8"?) on interior (under vinyl flooring), exterior layer also being the same plywood with under belly material coating. Sandwiched between these layers is a 1 1/2" welded aluminum frame. Between the framing members are large pieces of foam that are cut to size. all these pieces are put together, glued and "pinch rolled" under 1600lb psi. The floor in an R-pod extends to the outside edge of the walls, meaning they provide wall support, also meaning they can be a real pain to work on. Take a look at this construction video: https://www.youtube.com/watch?v=vMXneKc_fDo&t=120s

Thomasandrews628 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 27 Jan 2024 Location: FL Online Status: Offline Posts: 3	Post Options Post Reply Quote Thomasandrews628 Report Post Quote Reply Posted: 29 Jan 2024 at 10:52am
	I have water damage along the back wall where the main bed is located,it's completely rotted out,so if I can remove all the damaged then just go back with 1/8 or 1/4 luan for my top layer?
	TA

cbardy58 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 25 Sep 2021 Online Status: Offline Posts: 6	Post Options Post Reply Quote cbardy58 Report Post Quote Reply Posted: 29 Jan 2024 at 11:00am
	First you have to fix the source of water damage, otherwise, fixing it is not going to be worth your time. The plywood is glued right to the aluminum studs and the foam. When you demo the floor, you have to do so without damaging the foam. Along the back wall there is an 1/8" plywood covering the wiring, etc. you should be able to remove that as it is not glues down, just stapled. take a look inside there to see how deep the water damage goes, though there is a piece of 2x2 (or close to it) for stapling the plywood covering.

pedwards2932 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 21 Sep 2020 Online Status: Offline Posts: 333	Post Options Post Reply Quote pedwards2932 Report Post Quote Reply Posted: 08 Apr 2024 at 6:21pm
	N/A

StephenH Members Profile Send Private Message Find Members Posts Add to Buddy List podders Helping podders - pHp Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6325	Post Options Post Reply Quote StephenH Report Post Quote Reply Posted: 09 Apr 2024 at 9:49am
	That is why some of us have added those supports. I added one to our (former) RP-179 and it really helped. My steps on the R-Pod were attached to the frame, not the floor. Do you have the MORryde steps? That is what we have in the Cherokee Grey Wolf we have now. Those do attach to the floor.
	StephenH Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS