R-pod Owners Forum Homepage

This site is free to use.
Donations benefit a non-profit Girls Softball organization

Forum Home Forum Home > R-pod Discussion Forums > Podmods, Maintenance, Tips and Tricks
  New Posts New Posts RSS Feed: Generators
  FAQ FAQ  Forum Search   Calendar   Register Register  Login Login

Topic ClosedGenerators
 Post Reply Post Reply Page  <1234 5>
Author
Message Reverse Sort Order
  Share Topic Share Topic  Topic Search Topic Search  Topic Options Topic Options
TheBum View Drop Down
Senior Member
Senior Member


Joined: 26 Feb 2016
Location: Texas
Online Status: Offline
Posts: 1407 		Direct Link To This Post Topic: Generators
    Posted: 09 Jun 2017 at 1:30pm
Originally posted by SDTrialer


I can run the AC with a Honda e2000 but would run out of gas if it was left on all night. 


External gas tank:
https://smile.amazon.com/IPI-Industries-Breeze-Extended-Generator/dp/B002SWCUGK/

We use the dual-feed model with our tandem EU2000is.
Back to Top
GlueGuy View Drop Down
Senior Member
Senior Member
Avatar

Joined: 15 May 2017
Location: N. California
Online Status: Offline
Posts: 2702 		Direct Link To This Post Posted: 09 Jun 2017 at 1:27pm
Originally posted by StephenH

The wattage of the converter will depend on the state of battery charge. The 940 watts would be for a badly discharged battery. It would taper off once the battery was past the bulk charge stage. If it is just doing float charging, then the draw of the converter should be minimal.
Of the charge controllers I know, they will all go into bulk charge mode at startup. How long they stay there is dependent on the charge state of the batteries. If you are monitoring the voltage of the batteries, it will be "ramping up" to whatever the absorb voltage is.

During that time, the controller will be limited only by the maximum current it can put out (55 amps in the case of a WF-8955). Once the batteries increase resistance to a pre-determined point, the controller should drop to the absorb stage, which is no longer current limited, but is a pre-defined voltage. Once the controller has determined that the batteries have absorbed all they can (usually by monitoring the current flow at the absorb voltage), then the controller should drop to the float voltage. Float is more-or-less the "maintain" voltage that keeps the batteries happy.
bp
2017 R-Pod 179 Hood River
2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost
Back to Top
StephenH View Drop Down
podders Helping podders - pHp
podders Helping podders - pHp
Avatar

Joined: 29 Nov 2015
Location: Wake Forest, NC
Online Status: Offline
Posts: 6417 		Direct Link To This Post Posted: 09 Jun 2017 at 1:07pm
The wattage of the converter will depend on the state of battery charge. The 940 watts would be for a badly discharged battery. It would taper off once the battery was past the bulk charge stage. If it is just doing float charging, then the draw of the converter should be minimal.
StephenH
Happy is the man that findeth wisdom,...

ouR escaPOD mods
Former RPod 179
Current Cherokee Grey Wolf 24 JS
Back to Top
GlueGuy View Drop Down
Senior Member
Senior Member
Avatar

Joined: 15 May 2017
Location: N. California
Online Status: Offline
Posts: 2702 		Direct Link To This Post Posted: 09 Jun 2017 at 11:24am
I did some exploring, and found that R-pods "usually" use a converter from WFCO Industries. Ours has a model WF-8955, but yours may be different (http://wfcoelectronics.com/product-category/power-centers/wf-8900-series/).

According to the specifications for that model, it can charge at 55 amps, which is way more than I expected. Doing a little napkin-calculation, that comes to around 800 watts of power if/when doing a bulk charge. The specifications say it pulls up to 940 watts, so there is some fudge in there.

However... This all tells me that if your AC unit is pulling 1500 watts or so, and your converter is pulling 940 watts, then you will be at a nominal 2440 watts. About 240 watts more than a 2.2KW can do. 

So I would say that a 3KW generator would probably be a wise choice.
bp
2017 R-Pod 179 Hood River
2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost
Back to Top
SDTrialer View Drop Down
Newbie
Newbie


Joined: 01 Apr 2017
Online Status: Offline
Posts: 29 		Direct Link To This Post Posted: 09 Jun 2017 at 6:39am
I can run the AC with a Honda e2000 but would run out of gas if it was left on all night. 
Back to Top
Rustler View Drop Down
Senior Member
Senior Member
Avatar

Joined: 07 May 2016
Location: S. Oregon Coast
Online Status: Offline
Posts: 100 		Direct Link To This Post Posted: 08 Jun 2017 at 6:08pm
Here is one thing to keep in mind if you are using something like the Progressive Industries EMSHW30C surge protector - electrical management system. Such a system expects that it will be connected to a campground or home electrical system with the neutral bonded to the ground at the power company entrance panel. 

Many portable generators do not bond the ground to neutral since it is expected that the bonding will take place elsewhere. Thus when such a generator is connected to a camper the electrical management system will detect the open between ground and neutral and disconnect the generator from the camper. One way around this problem is to make a bonding connection by means of a 3-prong male extension cord plug. Just connect the ground to neutral with a short 14 gauge jumper with no other connections. Then this plug can be inserted into one of the duplex outlets on the generator, effectively bonding the ground to neutral at the generator set. The second outlet of the duplex pair is then used to connect to the camper. 

If you don't feel comfortable doing this, ask for help from a electrician or other knowledgable person. Mike Sokol has a discussion of this issue on his website. He also sells a plug like the one I described.
Russ
2009 Toyota RAV4
V6 w/ tow package
2016 Rpod 171 HRE
Back to Top
mcarter View Drop Down
podders Helping podders - pHp
podders Helping podders - pHp
Avatar

Joined: 07 Apr 2016
Location: Greenbrier, TN
Online Status: Offline
Posts: 3419 		Direct Link To This Post Posted: 08 Jun 2017 at 4:28pm
JayTizzoe,

With the converter CB ON, and generator connected to Pod. The charging circuit will charge your battery. Posts have indicated some issues with 2Ks and running charge circuit and AC. You need to check yourself. Plug your Pod into the genset - with Converter CB ON. Turn ON the AC, if it does not overload, you're good. If it does - Turn your Converter CB off - realize your Pod is now running 12 Volts from the battery, no recharge. Run your AC if required. When cool, turn your AC off and your Converter CB back on your genset will recharge your battery. You can also use your TV to recharge the Pod battery, hook it up to 7 pin connecter and start your TV. Your refer should be good for three days on propane. Smart power management is the key, use your resources. Happy Trails.
Mike Carter
2015 178
" I had the right to remain silent, I just didn't have the ability."
Back to Top
GlueGuy View Drop Down
Senior Member
Senior Member
Avatar

Joined: 15 May 2017
Location: N. California
Online Status: Offline
Posts: 2702 		Direct Link To This Post Posted: 08 Jun 2017 at 9:27am
Originally posted by JayTizzoe

If I have the fridge running on Propane for three days will that kill the battery?
You can run the fridge on propane several days on propane. The battery draw in this mode is very low. Battery life would be more dependent on what other things you are running on battery at the time.
Originally posted by JayTizzoe

Also, if I use a honda 2200 generator for the AC, do I just connect that power cord that I got with my RPOD(with the adapter of course) right to the generator to run the AC? Also, when this is connected, will it recharge my battery automatically? Thank you all for your help.
The 2.2KW will be "just enough" to run your AC, with not a lot left over. Charging the battery will take another couple hundred watts. I might put a Kill-a-watt on the outlet to see how much power each of your devices uses.
bp
2017 R-Pod 179 Hood River
2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost
Back to Top
JayTizzoe View Drop Down
Newbie
Newbie
Avatar

Joined: 02 Aug 2016
Location: Grand Haven
Online Status: Offline
Posts: 12 		Direct Link To This Post Posted: 08 Jun 2017 at 9:13am
Question for your regarding this:
I am going to dry camp this weekend and wanted to use the fridge on propane and the AC to sleep at night. I have a 2017 RPOD179. I am not an electrical specialist by any means so bare with me.
If I have the fridge running on Propane for three days will that kill the battery?
ALso, if I use a honda 2200 generator for the AC, do I just connect that power cord that I got with my RPOD(with the adapter of course) right to the generator to run the AC? Also, when this is connected, will it recharge my battery automatically? Thank you all for your help.
-John Torrey
John and Kari T.
2017 RPOD 179
2017 Chevrolet Silverado 1500
Back to Top
MDPaddlersPod View Drop Down
Senior Member
Senior Member


Joined: 06 Jul 2016
Location: Maryland
Online Status: Offline
Posts: 135 		Direct Link To This Post Posted: 20 Jul 2016 at 2:51pm
I have the Honda 3000is and couldn't be happier with it. I can run any and everything at the same time. My AC will run on the ECO (low power) switch after initial start-up.
MDPaddlersPod
2017 RPod 179
2002 Silverado1500
Back to Top
 Post Reply Post Reply Page  <1234 5>

Forum Jump Forum Permissions View Drop Down

Bulletin Board Software by Web Wiz Forums® version 9.64
Copyright ©2001-2009 Web Wiz