![]() |
|
Post Reply ![]() |
Author | |
ausdland ![]() Newbie ![]() Joined: 24 Jan 2015 Location: SF Bay, CA Online Status: Offline Posts: 29 |
![]() Posted: 05 Mar 2015 at 9:24pm |
Thanks, I'll have a look but we want to mount that handle on the outside wall closer to the toilet. Maybe sheet metal screws will hold if it's just sheet aluminum; if not, I guess it'll be molys. |
|
2002 Toyota Tundra
2015 R Pod 178 Next adventure? |
|
![]() |
|
Buxmont ![]() Newbie ![]() ![]() Joined: 25 Sep 2014 Location: PA Online Status: Offline Posts: 9 |
![]() |
As far as mounting the handle in the bathroom, if its opposite from the toilet you can remove the access panel on the bed side to see where studs are as well as looking in the wall from under the sink. I've done both (looking where studs are, and are not) for a tv mount on the bed side, and a reassessed (between studs) marine toilet paper holder.
|
|
2015 178 Rpod
2003 Chevy Trailblazer |
|
![]() |
|
ausdland ![]() Newbie ![]() Joined: 24 Jan 2015 Location: SF Bay, CA Online Status: Offline Posts: 29 |
![]() |
Thank you
|
|
2002 Toyota Tundra
2015 R Pod 178 Next adventure? |
|
![]() |
|
M0tl3y ![]() Groupie ![]() ![]() Joined: 21 Sep 2014 Location: Utah Online Status: Offline Posts: 61 |
![]() |
I use the extra short hollow wall anchors
http://www.lowes.com/pd_326640-10457-7304_0__?productId=3415974&Ntt=short+hollow+wall&pl=1¤tURL=%3FNtt%3Dshort%2Bhollow%2Bwall&facetInfo= |
|
The 178 club
|
|
![]() |
|
Podster ![]() Senior Member ![]() ![]() Joined: 16 Sep 2014 Location: San Antonio Online Status: Offline Posts: 1108 |
![]() |
This may provide some insight, but you will still probably have to probe for the framing.
|
|
Cliff & Raelynn
Ranger 4.0/178 (1/2 ton 5,800lb tow capacity) |
|
![]() |
|
Outbound ![]() podders Helping podders - pHp ![]() ![]() Joined: 19 Nov 2009 Location: Oshawa, Ontario Online Status: Offline Posts: 767 |
![]() |
There are wood studs on the interior bathroom walls. But, of course, if you use molly bolts, you don't need studs.
But, you might want to consider if 3M Command hooks will do the job. Also, Scotch Mounting Tape works very well for 2-3 lb items (and can be cleanly removed afterwards, with a little patience).
|
|
Craig :: 2009 RP171 towed by a 2017 F150
|
|
![]() |
|
ausdland ![]() Newbie ![]() Joined: 24 Jan 2015 Location: SF Bay, CA Online Status: Offline Posts: 29 |
![]() |
Thanks. Do you know if there's a wood stud in the bathroom? My stud finder is useless in the pod. |
|
2002 Toyota Tundra
2015 R Pod 178 Next adventure? |
|
![]() |
|
techntrek ![]() Admin Group - pHp ![]() ![]() Joined: 29 Jul 2009 Location: MD Online Status: Offline Posts: 9062 |
![]() |
Several of us have used Molly bolts for bigger stuff. I used 1 1/4". The only handle I added I mounted directly to a wood stud.
|
|
![]() |
|
ausdland ![]() Newbie ![]() Joined: 24 Jan 2015 Location: SF Bay, CA Online Status: Offline Posts: 29 |
![]() |
I want to install a couple hooks and a shelf in the kitchen/slide out of our 178 and a grab handle in the bathroom. Is there wood in any of the walls? What are people using for wall anchors?
|
|
2002 Toyota Tundra
2015 R Pod 178 Next adventure? |
|
![]() |
Post Reply ![]() |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |