Author |
Share Topic Topic Search Topic Options
|
shroomer
Senior Member
Joined: 24 Aug 2013
Location: New Haven, CT
Online Status: Offline
Posts: 236
|
Topic: LED lights Posted: 12 Jun 2014 at 10:37pm |
 I got these from RVLEDbulbs.com and they work pretty well. They're quite bright - brighter than the 921's and somewhat whiter. although not objectionable. They're a dollar less if you buy ten. They fit the fixture well and line up with the magnifying part of the lens. Not a bad replacement for original equipment.
|
Larry and Debbie w/Rosie the mutt. Old: '13 177, '06 Silverado V6
New: '15 Whitehawk 20MRB '14 Silverado V8
|
 |
shroomer
Senior Member
Joined: 24 Aug 2013
Location: New Haven, CT
Online Status: Offline
Posts: 236
|
Posted: 12 Jun 2014 at 10:32pm |
|
Larry and Debbie w/Rosie the mutt. Old: '13 177, '06 Silverado V6
New: '15 Whitehawk 20MRB '14 Silverado V8
|
 |
Craneman
Senior Member
Joined: 12 May 2013
Location: Tokeland,wa
Online Status: Offline
Posts: 387
|
Posted: 12 Jun 2014 at 9:05pm |
Push up on the bottom of the lens (cover) it may take a screwdriver to help. The bottom of the lens has one clip the top has two. Just snaps in the base Moe
|
Jo and Gary, 2010-174,2011 F150
Jo and Gary
2010 174
2011 Ford 150
|
 |
cody91
Senior Member
Joined: 12 Feb 2014
Online Status: Offline
Posts: 184
|
Posted: 12 Jun 2014 at 8:46pm |
How do you remove the cover from the porch light? I can't seem to find a screw or connector anywhere.
|
 |
Craneman
Senior Member
Joined: 12 May 2013
Location: Tokeland,wa
Online Status: Offline
Posts: 387
|
Posted: 12 Jun 2014 at 3:28pm |
[QUOTE=Goose]I changed all of our lights to LED, without any problems. All of the interior lamps use a "wedge base" and the porch light uses a 1156 "bayonet base". All interior lights I switched to a pancake style with 10 LED's, I don't have the number in front of me and the porch light to an 18 LED tower. You can find them all Superbrightleds.com.
The side marker lights and the fender lights I picked up at a truck stop so if there is a problem I can easily replace them. Goose[/QUOTE
If you get a chance could you give me the part number of the one you got for your trailer, they have too many choices and don't know wich one to get Moe
|
Jo and Gary, 2010-174,2011 F150
Jo and Gary
2010 174
2011 Ford 150
|
 |
Goose
Senior Member
Joined: 24 Sep 2010
Location: Arizona
Online Status: Offline
Posts: 672
|
Posted: 12 Jun 2014 at 1:49pm |
I changed all of our lights to LED, without any problems. All of the interior lamps use a "wedge base" and the porch light uses a 1156 "bayonet base". All interior lights I switched to a pancake style with 10 LED's, I don't have the number in front of me and the porch light to an 18 LED tower. You can find them all Superbrightleds.com.
The side marker lights and the fender lights I picked up at a truck stop so if there is a problem I can easily replace them. Goose
|
Mother Goose's Caboose..2011 RP171..07 Grand Cherokee
|
 |
HappyCampers
Newbie
Joined: 05 Apr 2013
Online Status: Offline
Posts: 24
|
Posted: 10 Jun 2014 at 10:42pm |
There are a number of issues surrounding converting to LEDs. I just started a post to clarify some of the issues, and CharlieM was kind enough to post a ton of information. Check this post out - hope this helps:
http://www.rpod-owners.com/forum_posts.asp?TID=4734
|
 |
Craneman
Senior Member
Joined: 12 May 2013
Location: Tokeland,wa
Online Status: Offline
Posts: 387
|
Posted: 10 Jun 2014 at 10:24pm |
I am thinking of changing my interior lights to led, I have a 2010 174. Does anyone have the LED bulb number??? I have the plug in type sockets . Moe
|
Jo and Gary, 2010-174,2011 F150
Jo and Gary
2010 174
2011 Ford 150
|
 |