Finishing off rpod cabinet edges

I suspect it isn't solid wood but a veneered finish so easing the corners might be impossible. You would quickly cut through the veneers to the core material. Which would probably be pressboard,

Ok, here is the scoop on cabinet material in my pod 2011 (172). There is no cherry wood in the pod anywhere, the only real solid wood is in the cab. doors and drawer fronts, they are made of maple and stained to look like cherry. The front frame and styles of cab. are made from lumbercore plywood (strips of wood glued together with veneer on each side). They then wrapped them with a layer of cherry colored vinyl ("mac tac"). The sides of the cabs. and the fronts under the seats are 1/8" paneling made of mahogany plywood with cherry fotofinish. The panel on the fridge door, the bathroom door are cherry fotofinish. The only particle board in the trailer is the kitchen counter and the tabletop. If you want to round off the corners you can either play around with stain trying to get a close match, or cover it with another layer of "mac tac".