Author |
Share Topic Topic Search Topic Options
|
Seanl
Senior Member
Joined: 19 Sep 2011
Location: Fredericton NB
Online Status: Offline
Posts: 633
|
Topic: Intro and Question re: Wallmarting Posted: 10 Sep 2012 at 6:19am |
Yes most WDH say you need class III hitch. I had to change mine from a class two to a class three. Reece has a 350/3500 pound lite duty hitch with sway control that will work with a class two as long as it has a 2 inch receiver.
|
Sean, 2011 Rpod RP-173,2009 Jeep Liberty Rocky Mountain Edition
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
Mike_n_Deb
Newbie
Joined: 07 Sep 2012
Location: New York
Online Status: Offline
Posts: 12
|
Posted: 10 Sep 2012 at 1:48pm |
Huh, that's a couple things I hadn't noticed. Both the WDH requirement and the fact the factory hitch on my jeep is only class II. Of course at the time I ordered the jeep I had no thoughts about a travel trailer. I needed it to haul firewood on a utility trailer which even the old 2dr Wrangler did no problem. That musta been a class I, it had an 1 1/4 inch receiver and only 2000lbs capacity.
Guess I'll be looking into that light duty Reece first. Really not thrilled with the idea of swapping out the factory hitch.
Thanks for the heads up.
......Mike
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
Mike_n_Deb
Newbie
Joined: 07 Sep 2012
Location: New York
Online Status: Offline
Posts: 12
|
Posted: 10 Sep 2012 at 5:55pm |
Ok, I looked at the Reese 350 and I kinda like it, but the Q&A in one of the listings still suggests that class 3 should be used. Could be class 2 hitches aren't designed to handle the torsion load applied by a WDH. I'm gonna have to crawl under the jeep and take a look.
.........Mike
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
Mike_n_Deb
Newbie
Joined: 07 Sep 2012
Location: New York
Online Status: Offline
Posts: 12
|
Posted: 10 Sep 2012 at 7:11pm |
Well I looked under the jeep and I think I definitely need a heavier receiver to use WDH of any type. The factory installed receiver is just bolted to the center of the last square tube crossmember of the jeeps frame. There is no 'extra' structure to transfer the WDH twisting load to the frame side rails. Eventually the crossmember to side rail welds would probably fail from torsion flex.
Oh well, it's only money. :)
........Mike
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
techntrek
Admin Group - pHp
Joined: 29 Jul 2009
Location: MD
Online Status: Offline
Posts: 9059
|
Posted: 10 Sep 2012 at 7:27pm |
The mounting location on the vehicle will probably be the same.
|
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
Seanl
Senior Member
Joined: 19 Sep 2011
Location: Fredericton NB
Online Status: Offline
Posts: 633
|
Posted: 10 Sep 2012 at 9:02pm |
I looked it up and the class III does bolt to the same place as the class II. It is just made out of heavier Steel. I am guessing the cross member is welded in well.
|
Sean, 2011 Rpod RP-173,2009 Jeep Liberty Rocky Mountain Edition
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
this_is_nascar
Senior Member
Joined: 24 Jan 2010
Location: NJ
Online Status: Offline
Posts: 466
|
Posted: 11 Sep 2012 at 7:20am |
Maybe it's just my way of thinking, however, I'd think that the factory installed the max hitch that the vehicle could safely handle. Replacing what you have with a heavier hitch is asking for troubles as far as I'm concerned. Not only are you taking a risk for you, but your putting other motorists at risk if you continue down this path.
|
"Ray & Connie"
- 2017 R-Pod RP-180
- 2007 Toyota Tacoma TRD-Off Road
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
Paige
podders Helping podders - pHp
Joined: 23 Jul 2012
Location: Upstate NY
Online Status: Offline
Posts: 216
|
Posted: 11 Sep 2012 at 9:37am |
When we bought our Rav we had the heavy duty tow package installed. It was approved by the Toyota dealer. It is what we did for our previous Rav when we were towing a popup trailer.
|
Paige and Pete
2010 177 - RPug
2012 Rav (six cylinder)
New York & Florida residents
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
Mike_n_Deb
Newbie
Joined: 07 Sep 2012
Location: New York
Online Status: Offline
Posts: 12
|
Posted: 11 Sep 2012 at 4:44pm |
Originally posted by this_is_nascar
Maybe it's just my way of thinking, however, I'd think that the factory installed the max hitch that the vehicle could safely handle. Replacing what you have with a heavier hitch is asking for troubles as far as I'm concerned. Not only are you taking a risk for you, but your putting other motorists at risk if you continue down this path.
|
this_is_nascar...I appreciate the concern BUT what you're saying would only be true if I was installing a heavier receiver to accomodate a load over the vehicle rating.
If my jeep, as-is, is rated to pull an rpod (which it is) then increasing the load rating of the receiver is absolutely not a safety concern. Probably quite the opposite. The factory installed a receiver 'adequate' for the rated tow load of the vehicle. As long as the max tow load is not exceeded an overrated receiver should actually be 'safer'.
.......Mike
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
this_is_nascar
Senior Member
Joined: 24 Jan 2010
Location: NJ
Online Status: Offline
Posts: 466
|
Posted: 11 Sep 2012 at 4:48pm |
Originally posted by Mike_n_Deb
Originally posted by this_is_nascar
Maybe it's just my way of thinking, however, I'd think that the factory installed the max hitch that the vehicle could safely handle. Replacing what you have with a heavier hitch is asking for troubles as far as I'm concerned. Not only are you taking a risk for you, but your putting other motorists at risk if you continue down this path.
|
this_is-nascar...I appreciate the concern BUT what you're saying would only be true if I was installing a heavier receiver to accomodate a load over the vehicle rating.
If my jeep, as-is, is rated to pull an rpod (which it is) then increasing the load rating of the receiver is absolutely not a safety concern. Probably quite the opposite. The factory installed a receiver 'adequate' for the rated tow load of the vehicle. As long as the max tow load is not exceeded an overrated receiver should actually be 'safer'.
.......Mike |
Gotcha.... I thought you were "super-sizing" to allow for an increased load.
|
"Ray & Connie"
- 2017 R-Pod RP-180
- 2007 Toyota Tacoma TRD-Off Road
|
![Back to Top Back to Top](forum_images/back_to_top.png) |