Anti sway or Equalizer hitch ??

Found a place online that has the E2 800/8000 trunnion version for about $360 shipped.  I can't pass up that price.  I want to get that one since my Jayco runs about 4500-lbs with 600-lbs tongue weight.

No, you have to order the ball, too.  Or order one from another supplier.  They warn of making sure to get the right size (threaded circumference, length).  I just bit the bullet and bought the one they sell.

OK thanks.  They shouldn't show it with the ball mounted in all the pics then.  It's pretty deceiving.

Just as another point of reference      ...e-trailer.com offers some great internet deals now and then. That's where we got our "Equal-i-zer" 600/6,000 hitch. As previously mentioned though, you need to buy the "ball" separately because they normally install these on larger trailers that accept a ball that is larger than 2" and the Pod trailer will only accept the 2" size. Plus, the ball needs to have a larger (thicker) shank and be of a certain length so that it won't interfere with the hitch itself. The ball we needed was called an "8K" ball because it was rated at 8,000 lbs. Equal-i-zer and other manufacturers make these but they are generally not available (at least in my experience) at local hardware stores or Walmart/Kmart.

'Slogger

I'm pretty sure RVWholesalers is where I got mine last year.  This page shows their ball selection.  http://www.rvwholesalers.com/catalog/rvw-tow-center-travel-trailer-hitches-e2-weight-distribution-travel-trailer-hitches/