Author |
Share Topic Topic Search Topic Options
|
techntrek
Admin Group - pHp
Joined: 29 Jul 2009
Location: MD
Online Status: Offline
Posts: 9062
|
Topic: Anti sway or Equalizer hitch ?? Posted: 22 Aug 2012 at 9:35pm |
No, you have to order the ball, too. Or order one from another supplier. They warn of making sure to get the right size (threaded circumference, length). I just bit the bullet and bought the one they sell.
|
|
 |
this_is_nascar
Senior Member
Joined: 24 Jan 2010
Location: NJ
Online Status: Offline
Posts: 466
|
Posted: 22 Aug 2012 at 4:22pm |
I'm assuming these come with the ball when you order. Would that be a safe assumption?
|
"Ray & Connie"
- 2017 R-Pod RP-180
- 2007 Toyota Tacoma TRD-Off Road
|
 |
this_is_nascar
Senior Member
Joined: 24 Jan 2010
Location: NJ
Online Status: Offline
Posts: 466
|
Posted: 22 Aug 2012 at 4:19pm |
Found a place online that has the E2 800/8000 trunnion version for about $360 shipped. I can't pass up that price. I want to get that one since my Jayco runs about 4500-lbs with 600-lbs tongue weight.
|
"Ray & Connie"
- 2017 R-Pod RP-180
- 2007 Toyota Tacoma TRD-Off Road
|
 |
this_is_nascar
Senior Member
Joined: 24 Jan 2010
Location: NJ
Online Status: Offline
Posts: 466
|
Posted: 22 Aug 2012 at 4:00pm |
Originally posted by Burt
We have an RP171 and the TV is a Ford Ranger 4..0 L V6, 4WD. We did put on a weight distribution set and later added the sway bar (right side only). We live and play near the Columbia River Gorge which can get gale force winds. The POD rides perfectly and has never swayed or been a "rocking" issue. It tows nicely.
If you live in an area that can get unexpected storms or gusts, both weight distribution and sway bars are recommended and our experiences are proof of that. Coming up the Columbia River gorge has many areas where downdrafts from the higher mountains can and do bring wind blasts unexpectedly. Crossing the Columbia River bridges can be very windy at times. The stability of both has been very helpful for our setup.
Good choosing.
Burt, Laura the White Tornado and Buddy the Wonder Labradork.
|
Which WDH system are you using?
|
"Ray & Connie"
- 2017 R-Pod RP-180
- 2007 Toyota Tacoma TRD-Off Road
|
 |
Burt
Groupie
Joined: 04 May 2012
Online Status: Offline
Posts: 62
|
Posted: 21 Aug 2012 at 10:35am |
We have an RP171 and the TV is a Ford Ranger 4..0 L V6, 4WD. We did put on a weight distribution set and later added the sway bar (right side only). We live and play near the Columbia River Gorge which can get gale force winds. The POD rides perfectly and has never swayed or been a "rocking" issue. It tows nicely.
If you live in an area that can get unexpected storms or gusts, both weight distribution and sway bars are recommended and our experiences are proof of that. Coming up the Columbia River gorge has many areas where downdrafts from the higher mountains can and do bring wind blasts unexpectedly. Crossing the Columbia River bridges can be very windy at times. The stability of both has been very helpful for our setup.
Good choosing.
Burt, Laura the White Tornado and Buddy the Wonder Labradork.
|
 |
Burt
Groupie
Joined: 04 May 2012
Online Status: Offline
Posts: 62
|
Posted: 21 Aug 2012 at 10:28am |
|
 |
Seanl
Senior Member
Joined: 19 Sep 2011
Location: Fredericton NB
Online Status: Offline
Posts: 633
|
Posted: 20 Aug 2012 at 8:16pm |
Originally posted by this_is_nascar
Originally posted by Seanl
I have an E2 WDH with sway control and I just got back from a 2000 mile trip. This is the longest trip I have taken with the pod. I was carrying a 130 lbs generator on the tongue of the pod so I really needed the WDH. It took me two days to get the WDH set properly. I put axle risers on the pod and added weight to the tongue so all my settings had changed. I drove for 2 hours the first day and the trailer swayed a little in the wind and was porpoising a little. The first day I raised the brackets to give me a little more Weight Distribution. That was a lot better but I needed a little more sway control so I put another washer on the head to angle it down a little bit more and that did the trick. In a strong cross wind I can get a little bit of sway but it is more than manageable and I don't want to put anymore spring in because I don't want to take weight off the back wheels. With the short wheelbase of my Jeep Liberty and the extra tongue weight I would not feel safe without the WDH and sway control. The creaking and groaning from the metal on metal sway control freaked my wife out though.
|
The E2 trunnion version is what I'm going to get. Was the basic installation difficult? I'm not exactly the handiest of people.
|
The manual that comes with the hitch is very good at explaining setup. What happened to me was I added over 100 pounds to the tongue of my trailer so my original setup was to light.
|
Sean, 2011 Rpod RP-173,2009 Jeep Liberty Rocky Mountain Edition
|
 |
techntrek
Admin Group - pHp
Joined: 29 Jul 2009
Location: MD
Online Status: Offline
Posts: 9062
|
Posted: 20 Aug 2012 at 5:01pm |
If you use the online tools available on the main Equalizer web site (I don't think they are on the E2 site) then the initial setup isn't bad. I didn't have those tools and I spent hours getting my setup right.
|
|
 |
this_is_nascar
Senior Member
Joined: 24 Jan 2010
Location: NJ
Online Status: Offline
Posts: 466
|
Posted: 20 Aug 2012 at 4:39pm |
Originally posted by Seanl
I have an E2 WDH with sway control and I just got back from a 2000 mile trip. This is the longest trip I have taken with the pod. I was carrying a 130 lbs generator on the tongue of the pod so I really needed the WDH. It took me two days to get the WDH set properly. I put axle risers on the pod and added weight to the tongue so all my settings had changed. I drove for 2 hours the first day and the trailer swayed a little in the wind and was porpoising a little. The first day I raised the brackets to give me a little more Weight Distribution. That was a lot better but I needed a little more sway control so I put another washer on the head to angle it down a little bit more and that did the trick. In a strong cross wind I can get a little bit of sway but it is more than manageable and I don't want to put anymore spring in because I don't want to take weight off the back wheels. With the short wheelbase of my Jeep Liberty and the extra tongue weight I would not feel safe without the WDH and sway control. The creaking and groaning from the metal on metal sway control freaked my wife out though.
|
The E2 trunnion version is what I'm going to get. Was the basic installation difficult? I'm not exactly the handiest of people.
|
"Ray & Connie"
- 2017 R-Pod RP-180
- 2007 Toyota Tacoma TRD-Off Road
|
 |
Seanl
Senior Member
Joined: 19 Sep 2011
Location: Fredericton NB
Online Status: Offline
Posts: 633
|
Posted: 20 Aug 2012 at 2:54pm |
I have an E2 WDH with sway control and I just got back from a 2000 mile trip. This is the longest trip I have taken with the pod. I was carrying a 130 lbs generator on the tongue of the pod so I really needed the WDH. It took me two days to get the WDH set properly. I put axle risers on the pod and added weight to the tongue so all my settings had changed.
I drove for 2 hours the first day and the trailer swayed a little in the wind and was porpoising a little. The first day I raised the brackets to give me a little more Weight Distribution. That was a lot better but I needed a little more sway control so I put another washer on the head to angle it down a little bit more and that did the trick. In a strong cross wind I can get a little bit of sway but it is more than manageable and I don't want to put anymore spring in because I don't want to take weight off the back wheels. With the short wheelbase of my Jeep Liberty and the extra tongue weight I would not feel safe without the WDH and sway control. The creaking and groaning from the metal on metal sway control freaked my wife out though.

|
Sean, 2011 Rpod RP-173,2009 Jeep Liberty Rocky Mountain Edition
|
 |