Request from some podders

I pushed the wrong key sorry about that.

 

 

In regard to attaching shelves and cabinets to the R-Pod walls, what did you use?  Wall anchors?  Mollybolts?  I attached a folding clothes rod, and had the hardest time with the hollow wall.  I made a mess to tell you the truth, but was able to "fix" it using some wall anchors that would bear more weight.  I tried to get close to a 2x4 when I did it, but there wasn't one there.  (Not to mention, that I'm no carpenter!) 

 

I guess what I'm asking is how did you attach cabinet & shelf mods to hollow walls so they could bear some weight?

 

What you have done to your R-Pod is outstanding! 

 

Diane

Tech, 

What size Molly bolts?

I have not yet used an anchor or mollybolt in my pod. The inside walls have a 1/8" plywood skin.

 So drill your holes in the wood bracket countersink them, hold the bracket in place mark the holes, then use a 1/16" bit drill through the skin, use drywall screws coarse thread ( grabers) and screw on the bracket . Dont use a drill or screwgun, you dont want to overturn the screw,if you overturn it it wont hold and you would have to use an anchore or a mollybolt.