R-pod Owners Forum Homepage

This site is free to use.
Donations benefit a non-profit Girls Softball organization

Forum Home Forum Home > R-pod Discussion Forums > Podmods, Maintenance, Tips and Tricks
  New Posts New Posts RSS Feed: Easy Stove Cover
  FAQ FAQ  Forum Search   Calendar   Register Register  Login Login

Topic ClosedEasy Stove Cover
 Post Reply Post Reply Page  12>
Author
Message
  Share Topic Share Topic  Topic Search Topic Search  Topic Options Topic Options
neadmo View Drop Down
Newbie
Newbie
Avatar

Joined: 08 Jun 2010
Location: Pontiac IL
Online Status: Offline
Posts: 11 		Direct Link To This Post Topic: Easy Stove Cover
    Posted: 10 Jun 2010 at 11:37pm

Wink FYI,

For those who don't want to spend the money on the stove cover (though it looks really nice), and for those who are carpentry-declined, I made one today that looks pretty good.
 
I bought a TV tray from the local Walmart. (I bought the dark color as it comes pretty close to matching the cabinet color.  It only cost $8.50.
 
The top of it makes a nice cover.  I used the tray's "leg stablizer" which was about 10inches to cut 4 pieces of 2 inch lengths to be the "legs" for my cover.
 
I removed 1 of the 4 pieces of wood screwed to the bottom of the tray.
 
It fits over the stove nicely, already has rounded edges, is already stained and matches the cabinets pretty closely.
 
Easy project for under $10 and done in under and hour.
neadmo 2016 rpod 179
Back to Top
TerryM View Drop Down
Admin Group - pHp
Admin Group - pHp
Avatar

Joined: 16 Nov 2009
Location: Saint Augustine
Online Status: Offline
Posts: 1950 		Direct Link To This Post Posted: 11 Jun 2010 at 4:01am
Can you put up a picture?  Sounds good!

Terry
RP-175 W/Lift Kit 2011 Ford F-150 4X4
Saint Augustine, FL: The first permanent European settlement in the USA: 1565
Back to Top
techntrek View Drop Down
Admin Group - pHp
Admin Group - pHp
Avatar

Joined: 29 Jul 2009
Location: MD
Online Status: Offline
Posts: 9062 		Direct Link To This Post Posted: 11 Jun 2010 at 9:10am
Also look forward to a picture.  I threw my cover together with scraps last year, just something to cover the stove for a few trips.  Haven't looked into something nicer but this sounds like a winner.
 
Welcome to the forum!
Doug ~ '10 171 (2009-2015) ~ 2008 Salem ~ Pod instruction manual
Back to Top
neadmo View Drop Down
Newbie
Newbie
Avatar

Joined: 08 Jun 2010
Location: Pontiac IL
Online Status: Offline
Posts: 11 		Direct Link To This Post Posted: 11 Jun 2010 at 11:16am
The first picture is of a TV tray I have in the house.  I tried to label it where I made cuts and the parts I used for the stove cover. I used the cross piece for the cover legs b/c its a bigger piece of wood than the tray legs. 
 
The 2nd pic shows the completed cover.  I assembled the legs w/ the board at the stove to make sure I put them in the right position.  I put a dab of wood glue on first to hold them in place.  I used inch and a half  deck screws.  I pre-drilled so as not to split the wood.  I used a drill bit the size of the screw head to make a small indentation on the top of the hole. ..just enough for the screw to go in flush w/ the top of the board.
 
I took off one of the small pieces of wood under the board b/c it was keeping the board from sitting evenly.  I may go back and move the other one out to the edge of the board and replace the one I took off putting it out toward the edge also. 
 
ALL DONE !  Big smile
 
neadmo 2016 rpod 179
Back to Top
jjbescher View Drop Down
podders Helping podders - pHp
podders Helping podders - pHp


Joined: 03 Feb 2010
Location: Clayton, NC
Online Status: Offline
Posts: 41 		Direct Link To This Post Posted: 12 Jun 2010 at 10:56pm
I like it a lot.  I may have to do this.  
'10 R-pod 173T. TV - '03 Honda Pilot
Back to Top
yizit View Drop Down
podders Helping podders - pHp
podders Helping podders - pHp
Avatar

Joined: 25 Feb 2009
Location: Wis. Dells, WI
Online Status: Offline
Posts: 663 		Direct Link To This Post Posted: 13 Jun 2010 at 12:23am
Looks great!!!  And so easy.  What a great idea to use a TV tray.  Thanks for sharing.

Former owner of 2009 172
Darlene & Jim, Ewok our Lhasa
Roada our 2004 Roadtrek C190Popular


Back to Top
jjbescher View Drop Down
podders Helping podders - pHp
podders Helping podders - pHp


Joined: 03 Feb 2010
Location: Clayton, NC
Online Status: Offline
Posts: 41 		Direct Link To This Post Posted: 14 Jun 2010 at 8:13am
Did this mod yesterday.  Other than the screws giving me a hard time, this mod was very easy.  Thanks for the idea.
'10 R-pod 173T. TV - '03 Honda Pilot
Back to Top
rpodcamper.com View Drop Down
Admin Group - pHp
Admin Group - pHp
Avatar

Joined: 26 Nov 2009
Location: Reading, Pa
Online Status: Offline
Posts: 3990 		Direct Link To This Post Posted: 15 Jun 2010 at 10:50pm
nice idea.  We picked up a nice wooden cutting board at Ikea and made legs on that.
Back to Top
splante View Drop Down
Newbie
Newbie
Avatar

Joined: 16 Jul 2010
Online Status: Offline
Posts: 21 		Direct Link To This Post Posted: 09 Aug 2010 at 2:59pm
Anyone find a stove cover to install that would also serve as a backsplash while cooking?
Back to Top
neadmo View Drop Down
Newbie
Newbie
Avatar

Joined: 08 Jun 2010
Location: Pontiac IL
Online Status: Offline
Posts: 11 		Direct Link To This Post Posted: 09 Aug 2010 at 7:17pm
I haven't done it but I would offer the idea of getting a piece of sheet metal (like the type for duct work); get it cut to size and  try gluing it to the wall right behind the stove.  This would make it permanent  (but I am chicken to put holes in the walls).  The sheet metal would give you a nice easy surface to wipe off.
neadmo 2016 rpod 179
Back to Top
 Post Reply Post Reply Page  12>

Forum Jump Forum Permissions View Drop Down

Bulletin Board Software by Web Wiz Forums® version 9.64
Copyright ©2001-2009 Web Wiz