![]() |
|
Post Reply ![]() |
Page 12> |
Author | |
Outbound ![]() podders Helping podders - pHp ![]() ![]() Joined: 19 Nov 2009 Location: Oshawa, Ontario Online Status: Offline Posts: 767 |
![]() Posted: 19 Aug 2010 at 6:34pm |
If you're buying a sewer hose support, make sure to measure your r-pod's sewer height first. The r-pod sits very low (even with risers) and you don't want to waste money on a sewer hose support that's higher than your sewer outlet.
|
|
Craig :: 2009 RP171 towed by a 2017 F150
|
|
![]() |
|
mountain mist ![]() Senior Member ![]() ![]() Joined: 25 May 2010 Location: Gatlinburg Tenn Online Status: Offline Posts: 426 |
![]() |
Thank you for fast come back.
I looked at the Slunky, it is a good bit cheaper than the other 2 I saw at Walmart.
Thanks Outbound
Techntrek- so you keep the grey water flowing, holding back that black until it becomes necessary to dump, get several showers and some dish washing too. Will try all of that.
Thanks
|
|
'11 Forest River r.pod 171
'10 Ford Edge ESCAPE POD Trudi and Austin mini-schnauzers change here, Trudi has gone, Austin now has a small black schnauzer buddy, Bentley |
|
![]() |
|
techntrek ![]() Admin Group - pHp ![]() ![]() Joined: 29 Jul 2009 Location: MD Online Status: Offline Posts: 9062 |
![]() |
I let mine lay on the ground. I'm right there when the black tank is dumped so once I hear it is done I'll move the last of the water along like an inchworm, then do the gray tank and do the inchworm thing again.
I leave the gray tank's valve open all the time until the black tank is ready to be dumped, then I'll close the valve to get a shower or two's worth of water in the gray tank. Then do the black, then gray, and leave the gray open again.
|
|
![]() |
|
Outbound ![]() podders Helping podders - pHp ![]() ![]() Joined: 19 Nov 2009 Location: Oshawa, Ontario Online Status: Offline Posts: 767 |
![]() |
A Slunky can be had pretty cheap. But, I'd only bother with one for a 20' run. Otherwise, I'd just leave it lying on the ground. Dump like you would at a dumpstation: black tank first, followed by grey. Try to make sure that both are 3/4 full before you dump.
|
|
Craig :: 2009 RP171 towed by a 2017 F150
|
|
![]() |
|
mountain mist ![]() Senior Member ![]() ![]() Joined: 25 May 2010 Location: Gatlinburg Tenn Online Status: Offline Posts: 426 |
![]() |
Bought one of the suggested elbows today at Wal-Mart. We had a straight one that fit down in the sewer, but did not have the elbow bend in it. I want something that easies the hose out of that bend IT has to make unless the elbow bend is already there.
Also The supports that are used under the hose if you are going to be someplace for a while. Pretty expensive. Any other suggestions on how to do the same thing?
I know to dump only when the holding tanks reach 3/4 full. Does a support that is highter at the end nearest the trailer and graduated down to the sewer end make any sense?
Any information on that will be very welcomed.
Thanks
Escape Pod
|
|
'11 Forest River r.pod 171
'10 Ford Edge ESCAPE POD Trudi and Austin mini-schnauzers change here, Trudi has gone, Austin now has a small black schnauzer buddy, Bentley |
|
![]() |
|
techntrek ![]() Admin Group - pHp ![]() ![]() Joined: 29 Jul 2009 Location: MD Online Status: Offline Posts: 9062 |
![]() |
I have the same adapter that Outbound posted. Love it, the threaded part fits any size connection, great for a good seal when you have full hookups at a site. As Outbound said using just the elbow at the dump site works well.
|
|
![]() |
|
Butterfly_Lee ![]() Senior Member ![]() ![]() Joined: 19 Nov 2009 Location: Corpus Christi Online Status: Offline Posts: 131 |
![]() |
I carry a Y connector with shut offs, when I have full hook up and know I'm going to dump I put the connector on the water connection first. That way I can just hook up the green hose and leave the white in place.
Normally after packing up and hitching up I'm all sweating, so I take a quick shower and run the water in the toilet a little so both tanks have some fluid in them (and chemical). The white hose and electric are the last to put away. Lee
![]() |
|
Still a work in progress, lots of pictures.
http://podterfly.blogspot.com/ |
|
![]() |
|
Outbound ![]() podders Helping podders - pHp ![]() ![]() Joined: 19 Nov 2009 Location: Oshawa, Ontario Online Status: Offline Posts: 767 |
![]() |
I bought an Easy Slip Hose Adapter at WalMart:
![]() Its a bit difficult to tell from the picture, but the elbow detaches from the 4-way adapter. I attached just the elbow part to my sewer hose and the whole unit easily fits into my stock sewer hose holder. The adapter part is kept in my storage bay; although after a year of r-pod ownership, I've never run into a situation where I needed it, so I may take it out soon. The elbow makes the trip to the dump station a bit easier as you can hook the elbow to the sewer lip and rest the sewer lid on top of the elbow to keep it in place. With it, I can get away with a 10' sewer hose; without it, I'd need a 20' length (because a 10' hose wouldn't stretch out to its full length, plus I'd want at least 1.5' of hose in the sewer to prevent the possibility of the hose escaping)
|
|
Craig :: 2009 RP171 towed by a 2017 F150
|
|
![]() |
|
TerryM ![]() Admin Group - pHp ![]() ![]() Joined: 16 Nov 2009 Location: Saint Augustine Online Status: Offline Posts: 1950 |
![]() |
|
|
RP-175 W/Lift Kit 2011 Ford F-150 4X4
Saint Augustine, FL: The first permanent European settlement in the USA: 1565 |
|
![]() |
|
Tamms ![]() Newbie ![]() ![]() Joined: 06 Aug 2010 Location: Ohio Online Status: Offline Posts: 23 |
![]() |
Yes, this is what I was told along with some tank cleaner. We did not do that (no ice left) but we only had very diluted yellow water in our tank.
|
|
Tammy, Robert, & Linus the morkie (Two & a Half Nerds)
|
|
![]() |
Post Reply ![]() |
Page 12> |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |