Podmods, Maintenance, Tips and Tricks: How to locate the metal framework?

Print Page | Close Window

How to locate the metal framework?

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=8230
Printed Date: 30 Oct 2025 at 8:48pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com

Topic: How to locate the metal framework?

Posted By: cdsmith
Subject: How to locate the metal framework?
Date Posted: 21 Jun 2016 at 6:01pm

So...

I'm in the process of putting a shelf above the bed in my 171. The plan is to secure (screw) 1"x2"x16" boards above the valance then mount the shelf to the boards.

What I want to use is some sheet rock anchors in the walls, but I don't want to accidentally hit the metal frame work during the process.

So the question is how do I determine (approximately) the location of the metal framework in the walls of the 171?

Thanks

Replies:

Posted By: kymooses
Date Posted: 22 Jun 2016 at 10:56am

Walk outside early one morning and look at the cool dew collecting on your Pod, you can see the outline of all the framework then and do a sketch for your Pod.

Or use a studfinder.

-------------
https://calendar.google.com/calendar?cid=cnBvZC5zcG90dGVyQGdtYWlsLmNvbQ - RPod Rallies
https://www.google.com/maps/d/embed?mid=1W1foQXGtrjf8aYly1uh0b-bHPfI&hl=en_US - RPod Owner Map

Posted By: cdsmith
Date Posted: 22 Jun 2016 at 8:50pm

I will give that a try. Thanks
cd

Posted By: M0tl3y
Date Posted: 23 Jun 2016 at 12:59pm

Although this isn't what you asked, I'll tell you what I did when I installed my shelving. Instead of working around the studs I just figured out the best placement for the brackets to properly hold my shelving and then drilled a small pilot hole first, for each screw location. If I ran into a stud then I just used a smaller sheet metal screw and put it directly into the stud, otherwise I used the small hollow-wall mounting screw. It worked great and the stud-mounted sheet metal screws are more secure and better load handling than the hollow-wall, in my opinion.

-------------
The 178 club