Print Page | Close Window

R-Dome for R-Pod 179

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=7353
Printed Date: 25 Oct 2025 at 5:45pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com


Topic: R-Dome for R-Pod 179
Posted By: jfouch
Subject: R-Dome for R-Pod 179
Date Posted: 13 Jan 2016 at 10:12pm
We purchased our R-Pod 179 in March of 2015. We also purchased an R-Dome that was believed to fit in the Keder track installed at the time of manufacture. During our first outing in April, we discovered that the "Keter" type bead on the R-Dome was not the correct size for the 14mm track on the trailer. I reported this immediately to our dealer, but was told I was wrong and this is the correct R-Dome. My wife and I tried numerous times to install this R-Dome, but could never get the 9mm bead stay in the 14mm track (see photo). It would slip out anyplace across the length of the track, and we were never able to complete the installation.   

Have other R-Pod 179 owners experienced the same problem with their R-Dome?
uploads/4670/R-Dome_for_R-Pod_179.jpg - R-Dome_for_R-Pod_179.jpg

-------------
Jim



Replies:
Posted By: kymooses
Date Posted: 14 Jan 2016 at 9:53am
That appears 100% to be the old dome.

Easy question, what color is it?

Also if you look inside below one of the windows you'll find a tag with the model number on it.

Color alone can prove 100% it is wrong, but the model number from that tag would also be undeniable proof.


-------------
https://calendar.google.com/calendar?cid=cnBvZC5zcG90dGVyQGdtYWlsLmNvbQ - RPod Rallies
https://www.google.com/maps/d/embed?mid=1W1foQXGtrjf8aYly1uh0b-bHPfI&hl=en_US - RPod Owner Map


Posted By: furpod
Date Posted: 14 Jan 2016 at 11:01am
Originally posted by kymooses

That appears 100% to be the old dome.

Easy question, what color is it?

Also if you look inside below one of the windows you'll find a tag with the model number on it.

Color alone can prove 100% it is wrong, but the model number from that tag would also be undeniable proof.


Yep.. the tag has almost always been found at the bottom of the "front door" window.. and I would for sure like to see the color of the dome fabric..


-------------


Posted By: jfouch
Date Posted: 14 Jan 2016 at 2:26pm
Thanks for your reply. I compared my R-Dome to the new ones delivered to my local dealer in October, and it was exactly the same. So, I wrote FR and described the problem and sent them the pics I posted here. They agreed to send me a new one, so I thought the problem was solved. Got the new one, and the bead was exactly the same as the one I had (9.4mm at the widest, but 8.35mm diagonally). Talked with FR again and they said the one they sent was the correct one, even though the bead will not stay in the track.

If you have an R-Dome that works with the 14mm Keder rail, will you please tell me the width of the bead on yours?     

Thanks for the help.

-------------
Jim


Posted By: Luv2Q
Date Posted: 17 Jan 2016 at 6:33pm
Originally posted by kymooses

That appears 100% to be the old dome.

Easy question, what color is it?

Also if you look inside below one of the windows you'll find a tag with the model number on it.

Color alone can prove 100% it is wrong, but the model number from that tag would also be undeniable proof.

Travis, on the R-dome, what model/color/order size should I be looking for for a 180?  We're due to pick ours up next Wed - with an R-dome - and I'm hoping to avoid a mismatch.  Thanks in advance.


-------------
John & Teri
Tundra 5.7L V8 / RP 180
E2 WDH / Integrated controller (POS) replaced by Tekonsha P3



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.64 - http://www.webwizforums.com
Copyright ©2001-2009 Web Wiz - http://www.webwizguide.com