Print Page | Close Window

stovetop attachment bracket broken--how to fix?

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=7002
Printed Date: 23 Oct 2025 at 1:49pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com


Topic: stovetop attachment bracket broken--how to fix?
Posted By: lblevins67
Subject: stovetop attachment bracket broken--how to fix?
Date Posted: 22 Sep 2015 at 3:26pm
Greetings Podders!

Can anyone suggest a way to fix the condition shown below? I removed our stovetop to clean under it and broke the bracket off that holds the screw. Headed to the hardware store now, but I don't expect they will have anything like this there. Any ideas that don't involve a welder or metalworking capabilities?

Thanks!
Lisa




Replies:
Posted By: Don Halas
Date Posted: 22 Sep 2015 at 7:19pm
You might be able to use a metal bracket like the ones they sell for shelving.  If that doesn't work, it looks like replacing the 'bowl' here shouldn't be too difficult if they'll sell you that part.



Posted By: scentralmt
Date Posted: 22 Sep 2015 at 11:54pm
I just had the same thing happen.  It is a Suburban cooktop and I found the part #online.  Cheap but shipping ruins that idea.  Went to a local RV parts dept. and gave them the part #, there was an updated number but it was the same piece.  I ordered 2 for $1.79 each.
Here is an online place with the part #.
http://www.rvpartsnation.com/product/11071/fastener-angle-bracket - http://www.rvpartsnation.com/product/11071/fastener-angle-bracket

Any local RV place should be able to order it.

Curtis


-------------
Curtis
2014 177
2001 F150


Posted By: bonanddoug
Date Posted: 23 Sep 2015 at 1:08pm
I found a small angle bracket at the hardware store and attached it to the 'bowl' with a sheet metal screw.  Drilled a hole in the horizontal part to accept the hold down screw.

-------------
2015 179 HRE
2014 Chevy Silverado 1500


Posted By: marwayne
Date Posted: 24 Sep 2015 at 10:02pm


-------------
If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd.





Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.64 - http://www.webwizforums.com
Copyright ©2001-2009 Web Wiz - http://www.webwizguide.com