Print Page | Close Window

axle stuff

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: https://www.rpod-owners.com/forum_posts.asp?TID=16235
Printed Date: 06 Aug 2026 at 10:43am
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com


Topic: axle stuff
Posted By: RN Dave
Subject: axle stuff
Date Posted: 10 Jul 2025 at 9:35am
trying to ask a question about my axle and why it leans in at the top.  keeps kicking me as spam.   RP 195   2020.    is it junk or they all do that  and is it safe to pull  had several opinions.  had it looked at by a axle dealer and got different answers.  from don't pull it to no problem  just tire wear issue.  thanks, Dave

-------------
Nurse Dave



Replies:
Posted By: RN Dave
Date Posted: 10 Jul 2025 at 9:36am
leans in about 1 inch,

-------------
Nurse Dave


Posted By: GlueGuy
Date Posted: 10 Jul 2025 at 11:06am
You have a bent axle. If it's 1 inch out, I'd say you need to replace it. It is a risk with the cantilevered axle to get bent on hard bumps. The solution is to reinforce it. There are numerous threads on this forum for how different folks have dealt with the problem.

-------------
bp
2017 R-Pod 179 Hood River
2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost


Posted By: RN Dave
Date Posted: 10 Jul 2025 at 11:07am
thank you

-------------
Nurse Dave


Posted By: jato
Date Posted: 11 Jul 2025 at 9:49pm
We had this on our 177 and it only was an issue on the slide side.  When I asked about it at the dealer I was informed it was 'typical' to have that on models with the slide and only occured on the slide side which was our case.  14 years and 51,000+ miles later it got bad enough (after our trip out west last fall, 2024 - and a LOT of potholes) to where we finally replaced.  For me it was more cosmetic than anything as tires were always changed out between 5-6 years of age and never once was the tread worn enough on the canted side to where it was a candidate for blowout or similar.  

-------------
God's pod
'11 model 177
'17 Ford F-150 4WD 3.5 Ecoboost
Jim and Diane by beautiful Torch Lake
"...and you will know the Truth and the Truth will set you free."


Posted By: RN Dave
Date Posted: 12 Jul 2025 at 8:53am
thank you

-------------
Nurse Dave


Posted By: Ericjump
Date Posted: 06 Aug 2026 at 9:14am
I just replaced my axle, Lipper (original axle manufacturer) has a 10 year warranty (but only if you are the original owner)! I sourced purchased and installed a new axle (the problem was the tire was hitting the fender. After getting some bad advice I replaced the axle. It turns out that same problem with new axle. The REAL problem was not the axle but that the wall outside the frame rails was sagging. The fix was to install supports under the outside wall (Slideout side) and move the fender up about an inch. Therefore I now have used (8 years and very little use) Lippert axle, and brakes for sale! New one cost me $1100.00 will sell used one for $500.00.
I still have the pallets the new one came on and will ship (Split the shipping cost with you. Let me know if you are interested...Ericjump@aol.com



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.64 - http://www.webwizforums.com
Copyright ©2001-2009 Web Wiz - http://www.webwizguide.com