Floor and Wall separating
Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: I need HELP!!!
Forum Discription: Perplexed/need help with a problem - ask here
URL: http://www.rpod-owners.com/forum_posts.asp?TID=16013
Printed Date: 20 May 2026 at 6:17pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: Floor and Wall separating
Posted By: AlaskaDan
Subject: Floor and Wall separating
Date Posted: 24 Jul 2024 at 6:32pm
|
I own a 2018 R-Pod 178. I bought this unit used and found the problem of the front right lower corner of the body coming lose from the frame and the channel the wall is supposed to sit in. The damage extends to the rear for about 4 feet. It extends from this lower corner on the front towards the center for about 3 feet. Below you will find a picture of the damage. I am requesting assistance if anyone has experienced similar damage. I do not know how the walls, floors and the frame are attached. Thank you in advance for any information or recommendations you might provide.  |
Replies:
Posted By: Fredmartin
Date Posted: 20 Sep 2025 at 7:14am
| I've got the same problem. Did you find any good solutions? |
Posted By: swansnest
Date Posted: 02 Oct 2025 at 11:40am
| Did you find a solution to your wall separation? I have the same problem, and I believe it is associated with leakage causing moisture problems. Looking at it, I think the solution may be to screw through the horizontal aluminum frame to the vertical aluminum frame and then caulk the screws. |