I need HELP!!!: Just a little problem

Print Page | Close Window

Just a little problem

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: I need HELP!!!
Forum Discription: Perplexed/need help with a problem - ask here
URL: https://www.rpod-owners.com/forum_posts.asp?TID=14118
Printed Date: 11 Jul 2026 at 1:04pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com

Topic: Just a little problem

Posted By: MitchReef
Subject: Just a little problem
Date Posted: 15 Oct 2020 at 10:10am

Hi there, My new to me 2014 178 microwave / oven is pushed back slightly in its opening, worse on the front edge. It is not flush or tightly fixed. I tried to just horse it into position but was not able to get it done. I didn't take anything apart but just wondered if I need to remove the cabinet trim around it and access the oven to tie it down in the right spot? I'm just a bit hesitant to start ripping into things without a clue.

-------------
Mitch and Laurie Carter....
Still rolling....

Replies:

Posted By: furpod
Date Posted: 15 Oct 2020 at 3:23pm

The trim is held in with 8 screws if I remember right. Just pull those, remove the trim face, and adjust the microwave hold downs themselves as needed, replace trim.