List Your Mods:

The shelving came from Lowes. 

It's called Roth + Allen.

It comes in 72" length which is just about two inches short of the distance from each side wall.

I used  four 3" steel corner braces to attach to the side walls.

I first removed the valance and mini blinds and using Molly bolts attached them to the walls.

I mounted it just above the lights and have experienced no headbanging even at my 6'4" height.

Have ordered a 2 1/2" galley rail (like the one above the refrigerator) to attach to help keep loose items from falling off.

The rear shelf is the same closet shelf cut in half and attached the same way.

ilthyn

Can you tell me, please, when the table is folded down, what is the horizontal measurement from the wall to the table top surface?

I am asking because we load my wife's (heavy) electric bike in the table area and the dimensions are tight. If the table sticks out too far then we cannot copy your excellent example. FYI, the bike rear wheel is secured in a channel mounted on a plywood sheet and then the bike is secured with tie-downs from under the seats. Inverted, the plywood base then becomes an outside table, mounted atop the wheel mudguard. A step stool is used for legs.

Thanks, ilthyn