| Author |
Share Topic Topic Search Topic Options
|
furpod
Moderator Group - pHp
Joined: 25 Jul 2011
Location: Central KY
Online Status: Offline
Posts: 6128
|
Calendar Event: Winterizing Newbie question Posted: 23 Sep 2013 at 4:42pm |
Originally posted by lumilew
Can I winterize by putting 4gallons rv anti freeze into fresh water tank than run it thru all water systems? I would drain the hot water tank first by turning two valves off and one valve open right? Then I take out the anode to drain it?
Thanks
Luanne rp178 |
Yes, that would cover it.. more or less. But you should have a winterization hookup at you water pump... If you just pump into the system from there, it takes about 3 quarts.. and Yes, to winterize the WH, you move the valves to the bypass position, and remove the anode to drain. I also, rinse the inside of the WH with a hose, we have VERY hard water here, and there is a fair amount of loose scale by the end of the camping season..
|
 |
lumilew
Newbie
Joined: 02 Jun 2013
Location: northern Illino
Online Status: Offline
Posts: 21
|
Posted: 23 Sep 2013 at 10:48am |
|
Can I winterize by putting 4gallons rv anti freeze into fresh water tank than run it thru all water systems? I would drain the hot water tank first by turning two valves off and one valve open right? Then I take out the anode to drain it?
Thanks
Luanne rp178
|
|
Luanne
|
 |
Camper Bob
podders Helping podders - pHp
Joined: 26 Sep 2011
Location: Portland Oregon
Online Status: Offline
Posts: 913
|
Posted: 23 Sep 2013 at 8:10am |
|
I got a large volume hand pump at the sporting goods store. About $19. Worked great. Safe Travels.
|
|
Camper Bob and Camper Sue
Gracie the Wonder Dog (12 LB. Mini Dachshund)
2013 Rpod 171HRE(ORPod)
2016 Lance 1685
2015 Nissan Pathfinder
|
 |
Lefty
Groupie
Joined: 24 Jul 2013
Location: Pittsboro, NC
Online Status: Offline
Posts: 62
|
Posted: 22 Sep 2013 at 5:29pm |
|
Now I understand. Thank you.
|
 |
techntrek
Admin Group - pHp
Joined: 29 Jul 2009
Location: MD
Online Status: Offline
Posts: 9066
|
Posted: 22 Sep 2013 at 5:29pm |
|
The biggest reason to blow the lines out first, is to clear that short piece of hose that runs from the city water connection to the rest of the system. I hand pump should be fine for this, if you don't want to remove the screen and push the pin to allow a backflow of antifreeze.
|
Doug ~ '98 Coleman ('05-'09) ~ '10 171 ('09-'15) ~ 2008 Salem ('14-'23) ~ 2019 Keystone ('23-now) ~
|
 |
Outbound
podders Helping podders - pHp
Joined: 19 Nov 2009
Location: Oshawa, Ontario
Online Status: Offline
Posts: 767
|
Posted: 22 Sep 2013 at 5:27pm |
|
The pin is on a spring; you have to hold it in to drain. After it squirts the water and then antifreeze out (usually up my shirt sleeve) and you release it, the pin/valve will reseat itself.
|
|
Craig :: 2009 RP171 towed by a 2017 F150
|
 |
marwayne
Senior Member
Joined: 25 Oct 2011
Location: Edmonton AB Can
Online Status: Offline
Posts: 1004
|
Posted: 22 Sep 2013 at 4:26pm |
|
No you don't.
|
|
If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd.
|
 |
Lefty
Groupie
Joined: 24 Jul 2013
Location: Pittsboro, NC
Online Status: Offline
Posts: 62
|
Posted: 22 Sep 2013 at 4:22pm |
|
Thank you. Do I need to do something to get the pin back out when I de-winterize?
|
 |
marwayne
Senior Member
Joined: 25 Oct 2011
Location: Edmonton AB Can
Online Status: Offline
Posts: 1004
|
Posted: 22 Sep 2013 at 4:18pm |
Carefully remove the screen and push the little white pin, this is a backflow valve if it wasn't there and you use water from your water tank the water would squired out of your city water connection.
|
|
If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd.
|
 |
Lefty
Groupie
Joined: 24 Jul 2013
Location: Pittsboro, NC
Online Status: Offline
Posts: 62
|
Posted: 22 Sep 2013 at 2:29pm |
|
Thank you for your reply. What do you mean "push in the pin"?
|
 |