Recently hooked up to city water, pressure regulated to <50 gpm, and found that it was spraying out pretty badly from behind the rotating screw-down cuff on the outside hookup. 

It was also leaking on the inside, both into the space between outer and inner walls, as well as into the interior surface of the camper beneath the bed.

I removed the water hose, made sure the pump was turned off, dried everything off, and then checked for any moisture leaking from any connection points coming from the city connection to the other lines inside the camper. Nothing found.

So main question is - How challenging is it to remove the city hookup assembly to test and possibly replace it? Anyone here ever done that? 

Alternately - Any other steps I could take to test if maybe the spray from the outside half of the hookup assembly was just a pressure relief thing, and I should actually be looking for line blockages or other issue elsewhere in the system?

Thanks for your input!

Hi folks, 

new member here with a problem and looking for insight. We have recently purchased a 2021 rpod 192.

On our first camping trip with this trailer I had an issue with water leaking or overflowing. We travelled to our first camp site with 1/3 full fresh water tank. After getting to our site we hooked up the connection to the city water supply line. We were there for 2 nights with no issues. On the third day we travelled to our next camp site, again with still 1/3 full fresh water tank. On arrival we again hooked up to city water supply. After 3 days we woke up to start packing up and heading home. As I was making my way around the trailer to start disconnecting thinks I heard running water and noticed that the filler cap for the fresh water tank was leaking. Checking the holding tank monitor I noticed that the grey water tank was full. Not surprised as I had not drained it since day one. I also noticed that the fresh water tank was now full as well even though I had not filled it since we had originally set off at 1/3 full. I could hear water running still and after investigation I found water leaking into the pass through storage area from somewhere above. I turned off the water supply for the city water connection and pulled the drain valve for the grey water to drain some of it out and then mopped up the water in the pass through storage area with towels.

Now as far as I know the fresh water and grey water systems are separate so my questions are; how did my fresh water tank get filled to overflowing? Is it possible that the grey water tank being full somehow back filled the fresh water tank? If so I now have a contaminated fresh water tank! I have bought some tank cleaning solution and am about to treat the fresh water tank and flush the entire system as best I can but I am struggling to understand how this could have happened. Any insight would be appreciated.

Cheers

Thanks,

Dan