R-pod Owners Forum : R-Pod 179 Defective Dinette http://www.rpod-owners.com/ This is an XML content feed of; R-pod Owners Forum : Warranty, Service and Recall Bulletins : R-Pod 179 Defective Dinette Copyright (c) 2006-2009 Web Wiz Forums - All Rights Reserved. Fri, 01 May 2026 12:54:00 +0000 Thu, 05 Mar 2015 11:59:10 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 9.64 360 www.rpod-owners.com/RSS_post_feed.asp?TID=5851 R-pod Owners Forum http://www.rpod-owners.com/forum_images/web_wiz_forums.png http://www.rpod-owners.com/ R-Pod 179 Defective Dinette : First thing I did when I bought... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=57513#57513 Author: Grayotter
Subject: 5851
Posted: 05 Mar 2015 at 11:59am

First thing I did when I bought my new 179 last August was to give my table away to Goodwill. To heavy and bulky to move it around. Replaced it with a fold up canvas table. No storage problems, easy to move and set up.
Grayotter
]]> Thu, 05 Mar 2015 11:59:10 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=57513#57513 R-Pod 179 Defective Dinette : I've got the '14... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=57466#57466 Author: DHuse
Subject: 5851
Posted: 03 Mar 2015 at 8:06pm

I've got the '14 179 HRE and the bed problem exists.  FRs response was the same then as now, remove the feet from the table.  They also sent me the cusion which fits in the space not covered by the existing cushions.  Of course removing the feet did not resolve the problem.  We're living with it!]]> Tue, 03 Mar 2015 20:06:45 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=57466#57466 R-Pod 179 Defective Dinette : You could pop the front grate... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=57433#57433 Author: techntrek
Subject: 5851
Posted: 03 Mar 2015 at 7:23am

You could pop the front grate off and poke around with your finger (when it is cool) to see if you can find the rattle.  It might be the front itself.]]> Tue, 03 Mar 2015 07:23:47 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=57433#57433 R-Pod 179 Defective Dinette : A bigger problem has been our... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=57426#57426 Author: bearclaw68
Subject: 5851
Posted: 02 Mar 2015 at 8:55pm

A bigger problem has been our heater rattle. Took it back to our dealer and 3 weeks later (took that long to get approval for parts?!!) Of course it still rattles. Tried a different dealer same thing. 3 weeks still rattles. Took it back and after one week they have done nothing as they can't seem to replicate the rattle. Told us they have had running 8 hrs a day and periodically check for noise. I'm not kidding. Talked to a parts guy who told me privately that no one had even looked at it yet. Said common practice is to let trailer set for at least 3 weeks before checking since we didn't buy there. Sure would appreciate a phone # for forest river. Neither dealer would give it to me.]]> Mon, 02 Mar 2015 20:55:31 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=57426#57426 R-Pod 179 Defective Dinette : Ours was the same.Frustrating.... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=57425#57425 Author: bearclaw68
Subject: 5851
Posted: 02 Mar 2015 at 8:40pm

Ours was the same.Frustrating. Tried 3 different tables all were off by 2 to 4 inches. We gave up and removed the storage box (3 screws) which greatly enhanced the leg room and made it way easier to get in and out of Dinette area. ]]> Mon, 02 Mar 2015 20:40:30 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=57425#57425 R-Pod 179 Defective Dinette : Sounds like the table + legs that... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56983#56983 Author: techntrek
Subject: 5851
Posted: 20 Feb 2015 at 6:54pm

Sounds like the table + legs that came with the earlier models were better.]]> Fri, 20 Feb 2015 18:54:23 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56983#56983 R-Pod 179 Defective Dinette : I have the 179 and mine drops... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56977#56977 Author: LePodders
Subject: 5851
Posted: 20 Feb 2015 at 3:16pm

I have the 179 and mine drops to the correct level. The cushions are off a bit. We actually removed the table anyway

]]> Fri, 20 Feb 2015 15:16:06 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56977#56977 R-Pod 179 Defective Dinette : One thing that l have learned... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56973#56973 Author: J&Jcf
Subject: 5851
Posted: 20 Feb 2015 at 2:24pm

One thing that l have learned over the last 63 years is ( new or used there are always problems) and l have been more satisfied buying used. I usually pay a lot less for used which builds in a
cushion for possible repairs. I am very handy and can make most repairs on my own.

In addition, when l have bought new my expectations are higher. Expectations for new is perfection and as we should all know nothing is perfect.]]> Fri, 20 Feb 2015 14:24:02 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56973#56973 R-Pod 179 Defective Dinette : I appreciate the comments and... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56950#56950 Author: Leighbeelu
Subject: 5851
Posted: 20 Feb 2015 at 10:03am

I appreciate the comments and fix's. They actually now provide a cushion to fill in where you mentioned so it should work, right?

I guess I never thought that something so basic and necessary would be handled so poorly by the manufacturer. Know its an issue, do nothing. I specifically bought a new unit instead of used because this is my first travel trailer (had pop-up previously) and I wanted to make sure that everything worked properly and I didn't get any surprises. Guess I learned a big lesson here.

Thank you for the advice.

Truly disappointed, Leigh]]> Fri, 20 Feb 2015 10:03:17 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56950#56950 R-Pod 179 Defective Dinette : You shouldn't have to... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56940#56940 Author: Podster
Subject: 5851
Posted: 19 Feb 2015 at 8:18pm

You shouldn't have to do it, but a simple fix would be to replace the high cushion on the table with a piece of memory foam with a thickness that will bring everything to level. Even if what you did have from the factory did fit, I don't think that big ole slot in the cushions right in the middle of the area on the table would be very comfortable anyway. 

A lot of Podders hate the table. Mine (and I see yours too) had a 1/2 inch slope and wobbled. They are heavy and cumbersome and it's in the garbage. 

Good luck Sir, and Happy Podding! Smile



]]> Thu, 19 Feb 2015 20:18:28 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56940#56940 R-Pod 179 Defective Dinette : This has been an issue with the... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56938#56938 Author: kymooses
Subject: 5851
Posted: 19 Feb 2015 at 7:40pm

This has been an issue with the 179 since it's debut.  We often caution new owners that the numbers the 179 claims to sleep are exaggerated because of this issue.


]]> Thu, 19 Feb 2015 19:40:47 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56938#56938 R-Pod 179 Defective Dinette : I agree - it's an odd arrangement,... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56935#56935 Author: TigerPawd
Subject: 5851
Posted: 19 Feb 2015 at 6:42pm

I agree - it's an odd arrangement, but the cushions that go on that table when converted to a bed are thinner.  The cushions that go onto those goofy hassock-type things are quite a bit thicker.  The result is a fairly shaky arrangement.  I got some of that non-skid liner for shelves to put under those thinner cushions to keep them from skidding. 

Again, not a great arrangement and I don't feel real secure when sitting down on those thick cushions.  They would be better for the grandkids, who love to bounce around on real beds.
]]> Thu, 19 Feb 2015 18:42:34 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56935#56935 R-Pod 179 Defective Dinette : I just stumbled on the pictures... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56932#56932 Author: techntrek
Subject: 5851
Posted: 19 Feb 2015 at 6:21pm

I just stumbled on the pictures in this post, which appears to have the same legs:  http://www.rpod-owners.com/forum_posts.asp?TID=842&PID=54292&title=list-your-mods#54292

So they don't fold up all the way, but in those pics the table is still able to lay flat relative to the seats.  Since yours don't I would make the switch I described above.  It will give you more leg and feet room when it is in the up position, a bonus.
]]> Thu, 19 Feb 2015 18:21:33 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56932#56932 R-Pod 179 Defective Dinette : I'm scratching my head on... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56930#56930 Author: techntrek
Subject: 5851
Posted: 19 Feb 2015 at 6:06pm

I'm scratching my head on this one, because on all tables I've ever seen either the legs fold up all the way (this is how my 171 was - we put 4 copy paper boxes under the table for storage), or it sits on a pole that is removed.  Then the table top sits on supports around the inner edge of the seats.  Since the seats surround the table in the 179 this should be true - or it is at least possible to make it true.  If the legs don't fold up all the way I would replace them with a pole support and add a 1" x 1" support around the edge.  On a difficulty scale from 1 to 10 I would give it a 1 1/2 (the extra half due to getting the edge support mounted level).]]> Thu, 19 Feb 2015 18:06:45 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56930#56930 R-Pod 179 Defective Dinette : Hello fellow Podders, I am writing... http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56928#56928 Author: Leighbeelu
Subject: 5851
Posted: 19 Feb 2015 at 5:28pm

Hello fellow Podders,

I am writing to inform anyone that is considering buying the 179 model to know that the dinette is defective as it does not fold down low enough to allow for anywhere near a level sleeping area. The table is 3 inches higher (see photo below) so it is very uncomfortable and not level at all. If you plan on using it as a sleeping area, you might consider another model or trailer entirely. I specifically purchased this model so that my daughter and guests could join me while camping.

I spoke with the dealer to see what could be done to correct this issue. I had a long conversation with Rodney Jarnagin of Forest River today. He was very nice and understanding but this was their response.

- Unfortunately, that is just the way they are.

- We are aware of this but don't have any plans to change it. The discrepancy is within our tolerance levels.

- They are not all the same height. When I asked if they would check to see if they could send me a shorter one they said that they wouldn't be willing to have someone measure the tables to see if I could get a replacement. They just have too many.

- I should take off the plastic bottom and screws. I checked and this would lower it 3/4 an inch and probably scratch up the floors but there is still 2 inches.

- I mentioned that other owners had cut and re-connected the base. They said "you can do that too" How nice of them. When asked if they would pay to have this done, I was told that Forest River would not be willing to do this.

Frankly, I am so disappointed. This is not a small issue where my guests are concerned. I realize that dinettes are not the most comfortable sleeping options but you generally don't have a big lump in the middle.

I normally don't put things out there on the web but I think it is important for anyone considering the Rpod 179 to know.

]]> Thu, 19 Feb 2015 17:28:48 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=5851&PID=56928#56928