http://www.rpod-owners.com/ This is an XML content feed of; R-pod Owners Forum : I need HELP!!! : Slide Out Problem Copyright (c) 2006-2009 Web Wiz Forums - All Rights Reserved. Thu, 21 May 2026 07:38:14 +0000 Tue, 26 Apr 2022 12:23:45 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 9.64 360 www.rpod-owners.com/RSS_post_feed.asp?TID=15233 http://www.rpod-owners.com/forum_images/web_wiz_forums.png http://www.rpod-owners.com/ http://www.rpod-owners.com/forum_posts.asp?TID=15233&PID=147884#147884 Author: oregonkramer
Subject: 15233
Posted: 26 Apr 2022 at 12:23pm

Thanks! Looked in the inside, found threads and took it out. It had sheared off. Now repaired and no more movement.]]> Tue, 26 Apr 2022 12:23:45 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=15233&PID=147884#147884 http://www.rpod-owners.com/forum_posts.asp?TID=15233&PID=147880#147880 Author: StephenH
Subject: 15233
Posted: 26 Apr 2022 at 7:52am

Ours originally did not have that. It was added because of the problem. It looks like it might have sheared off. Look on the inside for what looks like a washer. This is likely a speed nut. If you see threads, tighten the screw and see if it turns inside. If not, it did shear off. If it turned, then tightening the screw should pull the frame back up against the wall. It may have just loosened. This is what mine looks like on the inside.

]]> Tue, 26 Apr 2022 07:52:01 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=15233&PID=147880#147880 http://www.rpod-owners.com/forum_posts.asp?TID=15233&PID=147855#147855 Author: oregonkramer
Subject: 15233
Posted: 25 Apr 2022 at 12:55pm

I have a HR179 with a Lippert In-Wall Slide out. the H frame that is screwed in the outside wall in the lower back corner was pushed out causing a cap between camper and frame and the big Philips Head screw is sticking out about a 1/4 inch. It looks like it has been sheared off and is only about 3/8 long now. What does the big screw hold? I am thinking it is the motor mount or just clamping between inside and out of the H frame. The wall looks to move a little when the slide is first starting out.

Any suggested on how to trouble shoot or repair is greatly appreciated! Any diagrams of the slide or install instructions? TIA.

Photo shows frame with slide extended so no rain will get in. and screw out.

Mark

]]> Mon, 25 Apr 2022 12:55:06 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=15233&PID=147855#147855