A counter point to a couple of things mentioned so far.  The Rhino tubes can be cut to fit any carrier.  I probably bought a 15' tube and cut it to 13' (I don't know exactly -- but it's all that will fit in my carrier.)  There's almost nothing to cutting the tube.  You just need some nippers to cut the wire. 

And I have one of the carriers mounted under the tongue.  It's all I've ever used for the past 7 years.  Hardly worthless.  To each is own.  Mine's pretty beat up and used looking.  If/when I ever replace it, I may look at other options, but for me, I'm not aware of anything else that would add much value or utility.  I guess if I could get a new one with bluetooth....

TT

Now...you know, I assume, that most of those tapered cones, at the right angle, 'elbow' fitting, at the far end of the sewer hose will twist off, like a big bottle cap, and the whole affair, once separated, should fit inside the hose carrier. 

Maybe yours is different from most?

We also use the rhino flex sewer hose system and are happy with it as to service and reliability.  We installed a 5x5 pvc fence post to serve as the carrier. It fits under the pod and is attached to the frame.  there are end caps available.  It is the perfect storage container-cheap and very adaptable to your location.

the second picture shows a clear box container attached to the side of the 5x5 fence post.  It holds the clear connector for the sewer pipe.

Vann

Thanks StephenH - I actually read through ALL of your MOD's and making a list based off of a few of yours including the stinky slinky pipe!

And what I've read, even those that did get one of these pipes included it's not worth even using it. I have the RhinoFlex on my Amazon Pod list (which is WAY too long but.. fun stuff!).

Her maiden voyage is next week... woohoo!

But I have never used it (for the trailer itself) because it's too short, and it only came with one coupler on it...the other end is a bare cut-off end. I have used it for my 11 gallon 'blue boy' and it kinda works for that. (I added a 2nd coupler)

Actually you should buy a nice one anyway, I bought the mid-priced Camco RhinoFlex...seems to do the job for me and fits perfectly in the tube-carrier under the frame. This style of 'stinky-slinky' compresses down, or stays at the length you want, and is easy to work with, unlike the cheapos that seem to have a mind of their own because they are 'springy'. 

Congratulations and welcome! I hope you have many fun adventures and make many great memories with your RPod.

Is there one in the carrier? Ours did not come with one. If you get one, be sure you get one that will fit the carrier. I could only get a 10' one to fit the original carrier. I can carry a longer one in my home-built carrier (see my mods, link in signature). I think it is dealer-dependent. Some have a package that includes one. Others don't but may give you a store credit to purchase some basic items. Others may leave that all to you. If yours did not include one, you could go to your local Walmart and pick one up as almost all the Walmarts I have been in have a small RV section in with their automotive department.