R-pod Owners Forum : Entry Door Out of Square http://www.rpod-owners.com/ This is an XML content feed of; R-pod Owners Forum : I need HELP!!! : Entry Door Out of Square Copyright (c) 2006-2009 Web Wiz Forums - All Rights Reserved. Thu, 21 May 2026 03:27:39 +0000 Mon, 13 May 2019 10:51:59 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 9.64 360 www.rpod-owners.com/RSS_post_feed.asp?TID=12841 R-pod Owners Forum http://www.rpod-owners.com/forum_images/web_wiz_forums.png http://www.rpod-owners.com/ Entry Door Out of Square : I took a little sandpaper to... http://www.rpod-owners.com/forum_posts.asp?TID=12841&PID=123795#123795 Author: StephenH
Subject: 12841
Posted: 13 May 2019 at 10:51am

I took a little sandpaper to the door frame to smooth out where it was being gouged by the door. I also used the sandpaper to take a little material off the door lip that was hitting, just enough to clear. Then I repainted both the door and frame. This is something that should not be happening. There needs to be a way to adjust the door but there does not seem to be any way. My way worked. Whether it is the best way or not is debatable, but it worked for me.]]> Mon, 13 May 2019 10:51:59 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=12841&PID=123795#123795 Entry Door Out of Square : I'm thinking that adjusting... http://www.rpod-owners.com/forum_posts.asp?TID=12841&PID=123793#123793 Author: tcj
Subject: 12841
Posted: 13 May 2019 at 10:45am

I'm thinking that adjusting the camber of the door is not going to fix the out of square problem.  The top of the door needs to be adjusted to the right by somehow tweaking the top hinge.  I'm not sure how that would be done though.
]]> Mon, 13 May 2019 10:45:56 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=12841&PID=123793#123793 Entry Door Out of Square : My entry door is out of... http://www.rpod-owners.com/forum_posts.asp?TID=12841&PID=123787#123787 Author: PodDude
Subject: 12841
Posted: 13 May 2019 at 9:42am

My entry door is out of square and the top left corner is making contact with the frame and it seems to be getting worse.

I contacted lippert and they sent me a link to adjust the door camber and I have as far as I can tell but it only seems worse.

Anyone have this issue? I called a dealer and they said it was common, but they are months out and he recommended trying to fix myself as they charge $139/hour.  Any help would be appreciated.

https://imgur.com/5Utg3Ua

https://imgur.com/cOgVrW6

https://www.lci1.com/images/support/lipsheet/0233.pdf

EDIT - posted wrong link - updated with camber adjustment doc.
]]> Mon, 13 May 2019 09:42:03 +0000 http://www.rpod-owners.com/forum_posts.asp?TID=12841&PID=123787#123787