Obviously this isn't going to be as good to cook on as a full blown grill, but for its size and weight it's a neat grill. The heating is a little uneven, you have to be careful around the area where the solid section of the grill plate over the burner ends. At higher heats this tends to be quite a bit hotter than the rest of the grill and things will burn.

I adapted this to work with a quick connect fitting on our travel trailer and it works great. It folds down small enough to fit in one of our external storage compartments and is light enough to lift in and out without too many hassles. To do the adaption you just need an adjustable wench and some basic practical skills. I used the following parts to adapt it (see photos for detailed steps):
-  https://www.amazon.com/dp/B006PKKZL8/ref=cm_cr_asin_lnk - Anderson Metals Brass Pipe Fitting, Forged Reducing Street Elbow, 1/4" Female Pipe x 1/8" Male Pipe
-  https://www.amazon.com/dp/B007HG7WUQ/ref=cm_cr_asin_lnk - Camco 59903 Propane Quick-Connect Fitting - 1/4" NPT x Full Flow Male Plug
-  https://www.amazon.com/dp/B002BY02PQ/ref=cm_cr_asin_lnk - Rectorseal 31551 1/2 Pint Brush Top Tru-Blu Pipe Thread Sealant

I used the liquid sealant because I had it from working on natural gas lines in our house. If I didn't already have it, I would have probably gone with thread tape instead -  https://www.amazon.com/dp/B01FXXV048/ref=cm_cr_asin_lnk - LA-CO 44080 Slic-Tite PTFE Pipe Thread Tape, Premium Grade .