Podmods, Maintenance, Tips and Tricks: SeeLevel Tank Guages

Print Page | Close Window

SeeLevel Tank Guages

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=9371
Printed Date: 12 May 2025 at 6:20am
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com

Topic: SeeLevel Tank Guages

Posted By: garbob
Subject: SeeLevel Tank Guages
Date Posted: 22 Feb 2017 at 8:54pm

Has anyone installed these on an Rpod and if so, how are they working?

Thanks

Gary

Replies:

Posted By: CharlieM
Date Posted: 22 Feb 2017 at 10:16pm

Not in n RPOD but I did put it in my Camplite. It works great. So much better than the three probe OEM junker. I don't see why it wouldn't work as well for the Pod.

-------------
Charlie
Northern Colorado
OLD: 2013 RP-172, 2010 Honda Pilot 3.5L 4WD
PRESENT: 2014 Camplite 21RBS, 2013 Supercharged Tacoma 4L V6 4WD

Posted By: garbob
Date Posted: 22 Feb 2017 at 11:10pm

Thanks. What was it like to install?

Posted By: CharlieM
Date Posted: 23 Feb 2017 at 8:05am

Not difficult if you can get to a side of each tank. The existing wiring is generally reusable. You may have to modify the wall opening to accommodate the display panel.

-------------
Charlie
Northern Colorado
OLD: 2013 RP-172, 2010 Honda Pilot 3.5L 4WD
PRESENT: 2014 Camplite 21RBS, 2013 Supercharged Tacoma 4L V6 4WD

Posted By: garbob
Date Posted: 23 Feb 2017 at 9:30am

Thank you, I'll give it a try.

Posted By: CharlieM
Date Posted: 23 Feb 2017 at 9:59am

One bit of advice: Put the sensors on with duct tape first to try the placement out. You only get one shot with the permanent adhesive.

-------------
Charlie
Northern Colorado
OLD: 2013 RP-172, 2010 Honda Pilot 3.5L 4WD
PRESENT: 2014 Camplite 21RBS, 2013 Supercharged Tacoma 4L V6 4WD

Posted By: garbob
Date Posted: 23 Feb 2017 at 11:06am

Good advice, thanks.