Seal under slideout
Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=8606
Printed Date: 25 Jun 2025 at 12:44pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: Seal under slideout
Posted By: Joan and John
Subject: Seal under slideout
Date Posted: 17 Aug 2016 at 9:43am
| The rubber seal under the slideout has come out and sags down. Can't seem to get it back in the groove. Any advice? 2014 176T |
Replies:
Posted By: john in idaho
Date Posted: 17 Aug 2016 at 7:04pm
| You might have to spray some silicone spray in the track and start at one end. And slide along. I can't recall but I think it is in a track. |
Posted By: hogone
Date Posted: 18 Aug 2016 at 7:02am
mine does it every time; mainly in the middle by the gears. ive taken it off a couple of times and slid it back on, but it still does it. im able to snap at least the top back on track before closing slide for a good seal. i lube a lot with silicone, but it doesn't keep it from coming off. i think when im motivated, im going to put a new track and probably seal on(heck i havent even put my door window in yet ). hogone------------- Jon & Pam 2013 RP177 2023 F150 2017 HD Streetglide CHEESEHEAD |
Posted By: Joan and John
Date Posted: 24 Aug 2016 at 2:23pm
| would it be a good idea to put adhesive behind it and then push it on? If so, what adhesive would you recommend? |