Podmods, Maintenance, Tips and Tricks: Cracked/Split roof seals

Print Page | Close Window

Cracked/Split roof seals

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=8491
Printed Date: 15 May 2024 at 1:00pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com

Topic: Cracked/Split roof seals

Posted By: 0ttr
Subject: Cracked/Split roof seals
Date Posted: 01 Aug 2016 at 2:54pm

Hi,

Long time lurker, first time poster.

I have a 2013 177 and I just returned from my vacation. For the first time I took a ladder and cleaned the roof. Where the roof meets the sides there is a hard plastic strip about 1/2 inch wide and I noticed that significant portions of this along the roof (out of sight from the ground) were cracked, and when I touched one of the areas it started to disintegrate.

Has anyone else seen this kind of problem? Any suggestions for repairs?

Replies:

Posted By: Leo B
Date Posted: 01 Aug 2016 at 3:48pm

Those seals need to be inspected and maintained regularly. We check our each spring and clean and re-seal as needed.

-------------
Leo & Melissa Bachand
2017 Ford F150
2021 Vista Cruiser 19 csk
Previously owned
2015 Rpod 179
2010 Rpod 171

Posted By: 0ttr
Date Posted: 01 Aug 2016 at 4:43pm

How do you reseal what is essentially a hard tube?

I've seen posts that deal with the silicone sealant around the edges but not the actual plastic structure.

Posted By: osage
Date Posted: 01 Aug 2016 at 5:34pm

are you talking about the plastic that covers the screws in the channel at the edge of the roof if so you can just pull it out and replace it with new did mine this spring. Just bough it at my local service center. For the outer edge seams and around the windows I use poly seam seal from Lowes .

Posted By: furpod
Date Posted: 01 Aug 2016 at 6:48pm

Sounds like you are talking about the trim strip/cover. Available in rolls from most any decent RV shop, or online.

http://www.amazon.com/Camco-25262-Vinyl-Insert-White/dp/B0006JLW70 - Trim Insert.

-------------

Posted By: 0ttr
Date Posted: 02 Aug 2016 at 3:09pm

Ah, yes, that's what it is. I wasn't sure what those were...I thought they were a major seal.

Ok, something to be concerned about but not the emergency I thought it was. I'll purchase and fix.

Thanks

Posted By: mjh203
Date Posted: 14 Aug 2016 at 8:28am

Mine is cracked as well. I think from hail. Did you find the replacement molding?

Posted By: Lexhandu
Date Posted: 02 Sep 2016 at 2:47pm

Went to replace ours. Remove the bottom front screw only to find it screwed into a rivet that was punched through the trim cover. So how does one get around that? You can't attach the new trim cover without removing the rivet which will never go back in again. How do you all deal with this? Thanks feel free to message me.

-------------
2011 RPT 175..."lil buddy"
2014 F150 Lariat...oh yeow!
1 awesome Aussie

Posted By: furpod
Date Posted: 02 Sep 2016 at 5:55pm

Drill out the rivet. Repair, pop new rivet.

-------------