Steps on model 180
Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Introduce Yourself
Forum Discription: New Members - tell us about yourself and your r-pod
URL: http://www.rpod-owners.com/forum_posts.asp?TID=8333
Printed Date: 19 May 2024 at 5:53am
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: Steps on model 180
Posted By: nsl
Subject: Steps on model 180
Date Posted: 06 Jul 2016 at 9:50am
|
Good morning! This is literally the first time I have ever posted on a blog!! Whoo hoo! I have a 2016, model 180 and my husband and I love it. We will be traveling across country in August and look forward to it. The only problem we are having is the single step on the pod. We really need a double step. We looked into buying an additional adjustable step to put on the ground but that will not work as the main problem is exiting the camper to the step. If anyone has put a double step on their pod, PLEASE let me know where you bought the steps, what item # it is or model number. I would love to hear from you! Thank you so much!!
|
Replies:
Posted By: Leo B
Date Posted: 06 Jul 2016 at 9:54am
|
Welcome to the group!! Congrats on your 180!
------------- Leo & Melissa Bachand 2017 Ford F150 2021 Vista Cruiser 19 csk Previously owned 2015 Rpod 179 2010 Rpod 171 |
Posted By: StephenH
Date Posted: 06 Jul 2016 at 10:10am
This is the one we ordered from Camping World:
If you look at my mods, you will see it installed. I needed to make two shims since the brackets for the single step were spaced 1/2" wider than the frame for the double steps. I also had to notch out the back of the frame so that it would sit back far enough. ------------- StephenH Happy is the man that findeth wisdom,... http://www.rpod-owners.com/forum_posts.asp?TID=7712 - ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
Posted By: TheBum
Date Posted: 06 Jul 2016 at 11:33am
|
I installed the same one as our second set of steps after the first set met with a tall curb and essentially crumpled. The crumpled unit was the Flexco 24" double step, which I'd advise against because it's weak in the area where the slide-out slot for the upper step is.
I didn't use shims with the Lippert because the brackets welded to the frame were already pretty bent up from the mishap. I had to notch them very little to get them to fit. The mounting holes don't quite line up, so I had to enlarge the rear hole on each side. |
Posted By: nsl
Date Posted: 06 Jul 2016 at 3:23pm
|
Thank you! We have been camping for 43 years and finally decided to down size the camper. We love it!! NSL
 |