Wish List: Nuts,Bolts and washers

Print Page | Close Window

Nuts,Bolts and washers

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Wish List
Forum Discription: Tell Forest River what you would like to see in the r-pod
URL: http://www.rpod-owners.com/forum_posts.asp?TID=6474
Printed Date: 10 May 2024 at 8:34am
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com

Topic: Nuts,Bolts and washers

Posted By: Derek
Subject: Nuts,Bolts and washers
Date Posted: 22 Jun 2015 at 8:01pm

How about Stainless Steel nuts, bolts and washers . We just picked up our 179 Saturday and I noticed the nuts and washer on the four support legs are already rusting.I think that the extra cost would be negligible.

Derek and Alison.

-------------
Derek H

Replies:

Posted By: john in idaho
Date Posted: 23 Jun 2015 at 10:41am

Make sure you use lock washers with the nuts. Stainless is very hard won't jam onto the threads like regular nuts.

Posted By: Old Dingo&Mrs.Dingo
Date Posted: 24 Jun 2015 at 6:18pm

I use stainless fasteners all the time. Remember stainless steel is not much stronger than a grade 2 fastener. DON'T, use them where tensile strength is required. If you must, up size the bolt.

-------------
Old Dingo and/or Mrs. Dingo
181G
2013 Jeep Grand Cherokee

Posted By: ToolmanJohn
Date Posted: 27 Jun 2015 at 9:18pm

Originally posted by Old Dingo&Mrs.Dingo

I use stainless fasteners all the time. Remember stainless steel is not much stronger than a grade 2 fastener. DON'T, use them where tensile strength is required. If you must, up size the bolt.

This is very true. Stainless hardware is "soft" in comparison to a standard steel bolt. Easy to strip. Choose wisely where to use it, and not anywhere where structural strength is needed, unless you go bigger than original.

-------------
2017 ATC 7X20 Custom Toy Hauler
2013 R-Pod 177 (SOLD)
2013 VW Touareg TDI