Remove interior LED bezel
Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=6225
Printed Date: 17 Jun 2025 at 6:19pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: Remove interior LED bezel
Posted By: lahholmes
Subject: Remove interior LED bezel
Date Posted: 13 May 2015 at 12:28pm
| I have tried unsuccessfully to remove the LED bezels on the very bright interior lights with the thought that somehow I could cut down the amount of light, say over the bed, by removing one of the LED arrays or applying a colored film... one post indicated that you squeeze the plastic gently and slide to the outside but that has not worked for me... what am I doing wrong? |
Replies:
Posted By: Mountainrev
Date Posted: 13 May 2015 at 5:00pm
|
That's how I removed mine. It took me a few minutes to figure out, but once I got it, it was very easy. Yours might be different, however, since I have a 2014 that did not come with LEDs. I'm guessing you have a 2015 model. Hopefully someone with a similar-vintage Pod will chime in. ------------- 2014 177 2008 Jeep Grand Cherokee Turbodiesel "I lift my eyes to the hills." 
|
Posted By: Podster
Date Posted: 13 May 2015 at 7:28pm
|
It takes a little doing, probably a little more force than you are using. ------------- Cliff & Raelynn Ranger 4.0/178 (1/2 ton 5,800lb tow capacity) |