cabinet panel
Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=4344
Printed Date: 08 Jun 2025 at 12:56am
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: cabinet panel
Posted By: ron_whitt
Subject: cabinet panel
Date Posted: 23 Jan 2014 at 1:56pm
After taking off the cabinet panel that covers the water pump a few times the holes into the wood have become enlarged. Thinking of adding a piece of strapping to the back of the support (but after a few times of taking off the panel those holes would also become enlarged. Orr.. What about putting some Velcro strips on the back of the cabinet panel and you would be able to remove said panel numerous times and it would still attach fairly snug. What have you folks done.  ------------- Ron & Shirley 2020 Tacoma 2012 177 rpod |
Replies:
Posted By: furpod
Date Posted: 23 Jan 2014 at 4:39pm
|
Turned the panel up side down.. that moved all the holes.
------------- |
Posted By: Tars Tarkas
Date Posted: 23 Jan 2014 at 8:23pm
|
I did the velcro thing. It's the only way to go... TT ------------- 2010 176 FJ Cruiser |
Posted By: ron_whitt
Date Posted: 24 Jan 2014 at 9:17am
|
I was thinking along those lines also Tars. Just a piece on either side or top and bottom should do the trick. ------------- Ron & Shirley 2020 Tacoma 2012 177 rpod |