Slide out rubber seals ... Folded under partially
Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=2671
Printed Date: 24 May 2025 at 1:22am
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: Slide out rubber seals ... Folded under partially
Posted By: Bill-GA
Subject: Slide out rubber seals ... Folded under partially
Date Posted: 16 Jun 2012 at 3:17pm
|
I am wondering if anyone has a remedy / trick for having all the slide-out seals in the proper position when the slide-out is extended. My seals are usually half folded under ... especially on top. I.m thinking of taking a 3 step small ladder to inspect each time I push it out. - a real pain! ------------- Bill & Bev 13 yr old dachshund 'Elsa' 2010 RP-176T (tent & slide-out) 2011 Toyota Tundra 2WD TV |
Replies:
Posted By: Alex&Marie
Date Posted: 16 Jun 2012 at 5:09pm
|
Great question Bill. I have wondered the same thing. I had considered cleaning them and them lubricating with some silicon spray, but worried that might just attract dirt to them and not be effective. I've been very careful about cleaning off any debris when closing up after staying for some time at a location but that hasn't really helped with the "folded under" problem. ------------- Alex and Marie 2012 R-pod 177 2006 Toyota Tundra 
|