Print Page | Close Window

bath sink removal

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=16064
Printed Date: 17 Jun 2025 at 11:39am
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com


Topic: bath sink removal
Posted By: Pod People
Subject: bath sink removal
Date Posted: 16 Oct 2024 at 9:48pm


-------------

Vann & Laura 2015 RPod 179
https://postimg.cc/0zwKrfB9">



Replies:
Posted By: Pod People
Date Posted: 16 Oct 2024 at 9:52pm
We have a 179 which has a very small corner sink in the bath.  I want to remove the entire sink/faucet and shower and cover the resulting hole with a flat panel.
I seem to remember that someone did this a while back with good success. I tried the search, but could not get any results.
I would appreciate any info or tips or referral to past posts.
Thanks
travel often and safe
Vann


-------------

Vann & Laura 2015 RPod 179
https://postimg.cc/0zwKrfB9">


Posted By: GlueGuy
Date Posted: 17 Oct 2024 at 5:48pm
Without looking anything up, I would guess that white eterna-bond would do a bang-up jub.

-------------
bp
2017 R-Pod 179 Hood River
2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost


Posted By: Pod People
Date Posted: 18 Oct 2024 at 10:24am
Hey Glue guy
not sure I understand your post about eternabond
I'm thinking about a flat panel-maybe white plexiglass or thin plywood painted to cover the space where the sink was located


-------------

Vann & Laura 2015 RPod 179
https://postimg.cc/0zwKrfB9">


Posted By: GlueGuy
Date Posted: 18 Oct 2024 at 11:21am
I was just thinking about covering up the holes.



-------------
bp
2017 R-Pod 179 Hood River
2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost


Posted By: gpokluda
Date Posted: 18 Oct 2024 at 4:02pm
Originally posted by Pod People

We have a 179 which has a very small corner sink in the bath.  I want to remove the entire sink/faucet and shower and cover the resulting hole with a flat panel.
I seem to remember that someone did this a while back with good success. I tried the search, but could not get any results.
I would appreciate any info or tips or referral to past posts.
Thanks
travel often and safe
Vann

When we purchased our new camper, we had the sink removed to give more room in the wet bath. So glad we did that. You will need a shower valve-set with the threaded neck for the hand held shower head and no faucet. They are readily available on Amazon. Cover the resulting hole in the wall as best you can. You're going to have to wing it on how you hook up the supply lines. 


-------------
Gpokluda
2017 Rpod 179(sold 2023)
2022 Escape 5.0TA
2022 Ford F150 4X4 3.5EB
Kawasaki KLR650


Posted By: Larry-D
Date Posted: 21 Oct 2024 at 2:34pm
Amazon, worlds greatest store.  Had everything you need.  I did mine earlier this year.  
Removed the sink.  Got shower install "push pin" fasteners, look at your shower surround to see what they look like.  New shower control with only the shower head hose outlet.  Used the "push pins" to install the flat panel along with silicone sealant.  You'll also have to cap off the drain pipe.

The only downside on my install is that the white panel didn't match the shower surround's color.


Posted By: Ben Herman
Date Posted: 17 Nov 2024 at 12:04pm
I removed mine some time ago - the sink is useless. I bought a piece of white plexiglass and used silicone caulk to glue it over the hole, after capping the drain. I wanted to make it reversible for when we sell the trailer at some point.  



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.64 - http://www.webwizforums.com
Copyright ©2001-2009 Web Wiz - http://www.webwizguide.com