I need HELP!!!: Remove stereo head unit in RPOD 192

Print Page | Close Window

Remove stereo head unit in RPOD 192

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: I need HELP!!!
Forum Discription: Perplexed/need help with a problem - ask here
URL: http://www.rpod-owners.com/forum_posts.asp?TID=15819
Printed Date: 21 Jun 2025 at 3:21am
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com

Topic: Remove stereo head unit in RPOD 192

Posted By: Grinkle192
Subject: Remove stereo head unit in RPOD 192
Date Posted: 19 Aug 2023 at 3:16pm

I want to remove the stereo head unit from its wall mount inside my RPOD 192 and I can't figure out how to do that. I am getting worried that it might be mounted at the factory before the cabinets have been completely built, and after the cabinets are completed there is no easily reversible way to remove the stereo. Does anyone know?

I want to make sure the TV outputs are hooked up properly to the back of the head unit, I can't get the TV audio to play on the stereo, is my motivation.

Replies:

Posted By: Rpod-Couple
Date Posted: 19 Aug 2023 at 7:36pm

If you have the iRV Technologies radio, the mounting screws are hidden behind two black plastic vertical covers. One on right and other on left side. They are held on by magnets. You can pull these off to get to the screws behind them.

-------------
Steve & Elaine
2021 R-pod
2023 VW Atlas Cross Sport

Posted By: seafans
Date Posted: 19 Aug 2023 at 9:55pm

One of the first modification I did was replace the receiver unit in my 192. Mostly after I discovered the USB port does not read,only for charging. There is a panel inside the cabinet behind the receiver that needs to be removed, 4 screws I think so. Then you can trace out all of the wires. The front panel on the receiver snaps off. Be careful not to crack it. Then you have access to the screws. If all you want to do is check the wires the receiver does not need to be removed. There are no connections from the TV to the receiver. Have to use the output on the TV to input on the receiver some how.