Print Page | Close Window

Schwintek In-Wall Slideout

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=15666
Printed Date: 10 Jun 2025 at 4:12pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com


Topic: Schwintek In-Wall Slideout
Posted By: pedwards2932
Subject: Schwintek In-Wall Slideout
Date Posted: 18 Apr 2023 at 2:44pm
I was having an issue with my slideout sticking and thought I was going to need a new motor.  Forest River was absolutely no help.....said they wouldn't even sell me the motor.  I had to go thru a dealership and they had the motor but also had a troubleshoot document.  I can't seem to find how to attach a document to this.  Anyone know how?  Here are some links to manuals similiar to what I received.

https://forestriverinc.com/files/Component-Manuals/Slide%20Room/Lippert%20-%20Slide%20Out%20Model%20In-Wall%20%28Schwintek%29%20Manual%20Override.pdf - Forrest Rivers Troubleshoot  
https://lci-support-doc.s3.amazonaws.com/manuals/slideouts/in-wall/ccd-0001769.pdf - Lipperts Troubleshoot

Anyway after a lot of research I found that there was a piece of paneling that Forrest River used to keep wiring from getting in the way of the slide out.  It was getting snagged as the slide out went out.  It does not take very much resistance before the computer controller on this just stops the motors.  Just thought I'd pass this along.....saved me $250 on the motor.



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.64 - http://www.webwizforums.com
Copyright ©2001-2009 Web Wiz - http://www.webwizguide.com