Print Page | Close Window

2021 R-pod 196 dust cap rubber seal

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: I need HELP!!!
Forum Discription: Perplexed/need help with a problem - ask here
URL: http://www.rpod-owners.com/forum_posts.asp?TID=15637
Printed Date: 25 Jun 2025 at 7:45am
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com


Topic: 2021 R-pod 196 dust cap rubber seal
Posted By: Jrfich
Subject: 2021 R-pod 196 dust cap rubber seal
Date Posted: 22 Mar 2023 at 8:05am
I have a r-pod 196. I went to grease the bearings and noticed there was no rubber cap on one side covering the zerk fitting. I bought a new rubber cap but cant install it as the serk fitting sticks out a little bit past
the dust cap. Is this normal? I bought this camper new in 2021.



Replies:
Posted By: jato
Date Posted: 22 Mar 2023 at 9:39am
What you describe is normal.  You may want to compare the cap you purchased with the one that you already have on the other wheel to make certain they are identical.  If so, be patient with the one you purchased, get it good and warm if it is cold outside (let it sit in some hot water for a minute to soften the rubber), it should slide in the groove quite easily.

-------------
God's pod
'11 model 177
'17 Ford F-150 4WD 3.5 Ecoboost
Jim and Diane by beautiful Torch Lake
"...and you will know the Truth and the Truth will set you free."


Posted By: Jrfich
Date Posted: 22 Mar 2023 at 9:44am
Great thank you



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.64 - http://www.webwizforums.com
Copyright ©2001-2009 Web Wiz - http://www.webwizguide.com