Anode rod
Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=1474
Printed Date: 28 Apr 2024 at 11:57am
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: Anode rod
Posted By: cane2
Subject: Anode rod
Date Posted: 24 Oct 2010 at 12:57pm
|
Well i got shot twice with water today once when i did not release pressure on water heater when i took the anode rod out i got sprayed. I made a mental note for next year. I also got it from my city inlet when i released the pressure from it. The last thing i did was to open low water drains BEFORE i pumped in the antifreeze it all went on driveway another mental note i had another gallon so was ok. I got it done but with a few words to myself. I know i am not the only one that this has happened to and that makes me feel better.
|
Replies:
Posted By: TIDALWAVE
Date Posted: 29 Oct 2010 at 9:08am
After getting sprayed trying to remove the anode rod without releasing the water pressure first...
I took an indelible marking pen and printed the following on the water heater adjacent to the anode rod:
WATER PRESSURE/AC SWITCH?
Just seeing the message gets me to think about what I am trying to do.
I no longer get sprayed and nor have to worry about burning out the AC electric rod.
-------------
TIDALWAVE
|
Posted By: HuronSailor
Date Posted: 29 Oct 2010 at 11:28am
Good idea. I used to have similar reminders to myself in a couple of places on my boat too.
-------------
.: Mark & Beth :: Silverado 5.3L :: 2018 rPod 180 :.
|
|