171 - Mod - Table Holder
Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=1367
Printed Date: 12 May 2025 at 12:52pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: 171 - Mod - Table Holder
Posted By: rpodcamper.com
Subject: 171 - Mod - Table Holder
Date Posted: 06 Aug 2010 at 8:29pm
Not a high Tech way but after cutting my leg with the sharp holder it was time to go. I used a slide bolt attached to the table and a hole drilled in the wood under the seat. . |
Replies:
Posted By: popgoesweasel
Date Posted: 06 Aug 2010 at 9:30pm
|
We trashed our dinette table in the 171 and cut up a piece of hardwood to use as inserts when we need to make the dining area into a bed. We have a small portable table that we use both indoors and out as a replacement for the original dinette table. This give us much more room by converting the dining area into a sitting area. Two of the hardwood inserts are stored under the seat cushions while the third sits at the front wall for use as an occasional table. ------------- R171 2010 Frontier 2009 Site 40 Eastern Rally 2010 |