Part fell out while slideout moved
Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: I need HELP!!!
Forum Discription: Perplexed/need help with a problem - ask here
URL: http://www.rpod-owners.com/forum_posts.asp?TID=12993
Printed Date: 13 May 2025 at 7:24am
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: Part fell out while slideout moved
Posted By: RockyMtnRPod
Subject: Part fell out while slideout moved
Date Posted: 30 Jun 2019 at 4:19pm
|
Hello all, Just back from a trip. I opened the slideout to do some cleaning. It seemed a little strained. On the driveway I found a "pin", about 4-5 inches long with caps on each end. There appear to be 3 pins under the slideout normally, oriented parallel to the trailer. The forward one fell out. Has this happened to any of you? Can I just try to get everything lined up and tap it back in? Hopefully, this is a link to the photo: https://postimg.cc/HjWgcNZL Thanks, Chris ------------- 2020 TRD/Off Road Tundra with Sway Bar and SuperSprings 2016 178 "Sage" |
Replies:
Posted By: RockyMtnRPod
Date Posted: 30 Jun 2019 at 5:08pm
|
i think I figured this out. There are three "rollers" that the slide-out rolls on. The pin through on of those worked out of my slide-out. Probably took a while since its 4-5" long. Will have to check this regularly. i tapped it back in a tapped the end caps on tight with a small hammer - and large wrench as a backstop. Tapped the other two as well, just since I was under there. Pod-On 
------------- 2020 TRD/Off Road Tundra with Sway Bar and SuperSprings 2016 178 "Sage" |