Print Page | Close Window

vinyl insert along pod

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=12530
Printed Date: 14 Jul 2025 at 8:00pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com


Topic: vinyl insert along pod
Posted By: garyd
Subject: vinyl insert along pod
Date Posted: 13 Jan 2019 at 5:57pm
i have a rpod 179 ad need to replace the vinyl strip that fits in the chanel across the side and top of the pod. I have a awning attached. has anyone replaced this strip without having to remove awning? if so how?


-------------
gary



Replies:
Posted By: StephenH
Date Posted: 13 Jan 2019 at 6:40pm
I asked Forest River since I had the same issue. The answer is simple: Run the end of the strip in under the awning as far as you can. Don't worry about what you can't reach. If you want to, you can stuff a piece of foam (I used part of a pool noodle) in the opening to seal it up better. This is more important in the front since air pressure from rolling down the road will tend to push water in the front. If you really want to do so, you can put some non-sag lap sealant over the foam, but if you are using closed cell foam (e.g. pool noodle) then it is not needed. 

-------------
StephenH
Happy is the man that findeth wisdom,...

http://www.rpod-owners.com/forum_posts.asp?TID=7712 - ouR escaPOD mods
Former RPod 179
Current Cherokee Grey Wolf 24 JS



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.64 - http://www.webwizforums.com
Copyright ©2001-2009 Web Wiz - http://www.webwizguide.com