I need HELP!!!: pig tail holder ( electrical connector holder )

Print Page | Close Window

pig tail holder ( electrical connector holder )

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: I need HELP!!!
Forum Discription: Perplexed/need help with a problem - ask here
URL: http://www.rpod-owners.com/forum_posts.asp?TID=12435
Printed Date: 11 May 2025 at 3:06am
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com

Topic: pig tail holder ( electrical connector holder )

Posted By: Shane
Subject: pig tail holder ( electrical connector holder )
Date Posted: 23 Nov 2018 at 3:59pm

I bought a pig tail holder for the electrical connector on the trailer, it came with two self tapping screws I want to screw into the frame of the trailer. They are small screws, would this be ok to do or would this weaken the frame near the coupler? I thought about using zip ties but would rather be more secure with screws?

-------------
ENGINE 55,TRUCK 44,BATALLION 12

Replies:

Posted By: mcarter
Date Posted: 23 Nov 2018 at 4:01pm

I have one, I screwed it to frame, very easy. Drill pilot hole big enough as to not twist off your sheet metal screw.

-------------
Mike Carter
2015 178
" I had the right to remain silent, I just didn't have the ability."

Posted By: Shane
Date Posted: 23 Nov 2018 at 4:03pm

Thanx mcarter!

-------------
ENGINE 55,TRUCK 44,BATALLION 12